GRADE CHART
Stainless steel grade chart and properties
See the properties of austenitic, ferritic, martensitic, duplex and precipitation-hardening (PH) stainless steels in one table. Each rating shows the value behind it. Pick two or three grades to open a detailed comparison.
What is the part for?
| Hardening | Magnetic | |||||||
|---|---|---|---|---|---|---|---|---|
| 303Austenitic | None (cold work) | No | ||||||
| 304Austenitic | about the same as 304 | None (cold work) | No | |||||
| 304LAustenitic | about the same as 304 | None (cold work) | No | |||||
| 321Austenitic | 10% dearer than 304 | None (cold work) | No | |||||
| 301Austenitic | 5% cheaper than 304 | None (cold work) | No | |||||
| 301LNAustenitic | None (cold work) | No | ||||||
| 305Austenitic | 20% dearer than 304 | None (cold work) | No | |||||
| 347Austenitic | None (cold work) | No | ||||||
| 304CuAustenitic | None (cold work) | No | ||||||
| 316Austenitic, Mo | 75% dearer than 304 | None (cold work) | No | |||||
| 316LAustenitic, Mo | 75% dearer than 304 | None (cold work) | No | |||||
| 316TiAustenitic, Mo | 75% dearer than 304 | None (cold work) | No | |||||
| 316L / 316LMoAustenitic, Mo | 95% dearer than 304 | None (cold work) | No | |||||
| Nitronic 50Austenitic, Mo | None (cold work) | No | ||||||
| 316LNAustenitic, Mo | None (cold work) | No | ||||||
| 316LVMAustenitic, Mo | None (cold work) | No | ||||||
| 904LSuper austenitic | 3.1× the price of 304 | None (cold work) | No | |||||
| 254 SMOSuper austenitic | 3.2× the price of 304 | None (cold work) | No | |||||
| 317LSuper austenitic | None (cold work) | No | ||||||
| 317LMNSuper austenitic | None (cold work) | No | ||||||
| 310MoLNSuper austenitic | None (cold work) | No | ||||||
| Alloy 926Super austenitic | None (cold work) | No | ||||||
| 1.4565Super austenitic | None (cold work) | No | ||||||
| 1.4652 (654 SMO)Super austenitic | None (cold work) | No | ||||||
| 310SHeat-resisting austenitic | 75% dearer than 304 | None (cold work) | No | |||||
| 309SHeat-resisting austenitic | None (cold work) | No | ||||||
| X15CrNiSi20-12Heat-resisting austenitic | 25% dearer than 304 | None (cold work) | No | |||||
| 1.4835 (253 MA)Heat-resisting austenitic | 15% dearer than 304 | None (cold work) | No | |||||
| 1.4818 (153 MA)Heat-resisting austenitic | None (cold work) | No | ||||||
| 314Heat-resisting austenitic | 80% dearer than 304 | None (cold work) | No | |||||
| 430Ferritic | 50% cheaper than 304 | None (cold work) | Yes | |||||
| 1.4104Ferritic | None (cold work) | Yes | ||||||
| 441Ferritic | 40% cheaper than 304 | None (cold work) | Yes | |||||
| 444Ferritic | 10% dearer than 304 | None (cold work) | Yes | |||||
| X2CrNi12Ferritic | 55% cheaper than 304 | None (cold work) | Yes | |||||
| 410SFerritic | None (cold work) | Yes | ||||||
| 430NbFerritic | None (cold work) | Yes | ||||||
| 434Ferritic | 25% cheaper than 304 | None (cold work) | Yes | |||||
| 1.4713Ferritic | 65% cheaper than 304 | None (cold work) | Yes | |||||
| 1.4742Ferritic | None (cold work) | Yes | ||||||
| 1.4762Ferritic | None (cold work) | Yes | ||||||
| 410Martensitic | Quench and temper | Yes | ||||||
| 416Martensitic | Quench and temper | Yes | ||||||
| 420 (1.4021)Martensitic | 55% cheaper than 304 | Quench and temper | Yes | |||||
| 420 (1.4028)Martensitic | 55% cheaper than 304 | Quench and temper | Yes | |||||
| 431Martensitic | Quench and temper | Yes | ||||||
| 440CMartensitic | Quench and temper | Yes | ||||||
| 415Martensitic | Quench and temper | Yes | ||||||
| 420 (1.4034)Martensitic | 55% cheaper than 304 | Quench and temper | Yes | |||||
| X50CrMoV15Martensitic | Quench and temper | Yes | ||||||
| 1.4122Martensitic | Quench and temper | Yes | ||||||
| 2304Lean duplex | about the same as 304 | None (cold work) | Yes | |||||
| 2101Lean duplex | 25% cheaper than 304 | None (cold work) | Yes | |||||
| 2404Lean duplex | None (cold work) | Yes | ||||||
| Duplex 2205Duplex | 65% dearer than 304 | None (cold work) | Yes | |||||
| Super duplex 2507Super duplex | None (cold work) | Yes | ||||||
| Super duplex S32760Super duplex | None (cold work) | Yes | ||||||
| 17-4 PHPrecipitation hardening (PH) | Ageing | Yes | ||||||
| 15-5 PHPrecipitation hardening (PH) | Ageing | Yes | ||||||
| 13-8 Mo PHPrecipitation hardening (PH) | Ageing | Yes | ||||||
| 17-7 PHPrecipitation hardening (PH) | Ageing | Yes |
Sources and technical details
Corrosion: midpoint of the PREN range; thresholds 14 / 18 / 24 / 32. Sulphur-bearing free-machining grades (303, 416, 430F) one step lower. PREN ranks grades and is not a test result in a given environment.
Strength: Outokumpu typical Rp0.2 (MPa) in the stated product and condition; thresholds 300 / 450 / 650 / 900. Standard minimum values are on the grade pages.
Heat resistance: maximum continuous service temperature in dry air (scaling limit; ISER/Euro Inox Table 8, Atlas Figure 11, Outokumpu Table 6:4); for duplex grades the upper limit is 250 °C because of embrittlement (Outokumpu; Atlas 300 °C), for 904L 550 °C because of sigma phase (Atlas). Thresholds 400 / 750 / 900 / 1050 °C. Creep strength must be assessed separately for loaded parts.
Estimated price: five levels from $ (cheap) to $$$$$ (dear); 304 is in the middle ($$$). The level comes from the 12-month average monthly alloy surcharge, which makes up most of the price difference between grades, compared with 304 (under 60 % of 304 is $, under 90 % $$, twice or more $$$$$); the percentage shows on hover and in the comparison tool. Size, quantity, cutting and base price are not included; request a quotation for an exact price.
Machinability: BSSA index (free-machining carbon steel = 1.0) or steel type class. Weldability and magnetism: steel type class (Outokumpu Table 9:1).
Outokumpu — Handbook of Stainless Steel, 2013 (PDF) — Tables 7:5–7:6 typical yield strength; Table 9:1 machinability, weldability and magnetism by steel type; Table 10:1 machinability index (BSSA); p.7: effect of sulphur.
EN 10088-3:2023 and producer datasheets — composition — Composition limits used for PREN; per-grade sources on the grade pages.
Euro Inox / ISER — Stainless Steels at High Temperatures, Table 8 (PDF) — Maximum service temperature in air, intermittent and continuous.
Atlas Steels — Technical Handbook of Stainless Steels, 2021, Figure 11 (PDF) — Maximum service temperature in dry air (ASM Metals Handbook); grade data sheets (2021): 303, 304/304L, 316/316L, 431, 444, 904L, 2205, 2304, 2507, 3CR12.
legierungszuschlag.info — monthly alloy surcharges (December 2025 – November 2026) — Monthly surcharges by grade based on prices published by producers in Germany; 12-month average.
Outokumpu — Monthly Alloy Surcharges for Flat products, December 2024 (PDF) — Cross-check of the ratios.
Carpenter — 440C datasheet (PDF) — Dependence of corrosion resistance on heat treatment.
- 310S, 309S, X15CrNiSi20-12, 1.4835, 1.4818, 314, 1.4713, 1.4742, 1.4762: Heat-resisting grade, chosen for oxidation resistance at high temperature rather than wet corrosion.
- 440C: Corrosion resistance depends on heat treatment and drops when annealed or tempered above about 427 °C (Carpenter 440C datasheet). Sources differ in how they compare it with 304.
- 2304: The machinability rating is the lean duplex type class; the handbook explains it specifically for LDX 2101.
- 17-4 PH, 15-5 PH, 13-8 Mo PH, 17-7 PH: Corrosion resistance and strength depend on the ageing condition; the table shows the annealed (Condition A) state.
- Nitronic 50: Nitrogen-strengthened austenitic grade; strength is not in the Outokumpu tables, see the producer data on the grade page.
Frequently asked questions
What are the stainless steel grades and classes?
Stainless steels fall into five families by structure: austenitic (304, 316L), ferritic (430, 444), martensitic (410, 420, 431), duplex (2205, 2507) and precipitation-hardening PH (17-4 PH, 15-5 PH). Each family balances corrosion resistance, strength and machinability differently.
Can stainless steel grades be ranked from best to worst?
There is no single “best” ranking; it depends on the property. In this table corrosion resistance is rated from PREN, strength from typical yield strength, and machinability and weldability from the producer handbook classes, each on a 1–5 scale.
Which stainless steel is the most corrosion resistant?
The five grades with the highest PREN in the table: 1.4652 (56.8), 1.4565 (47.1), Alloy 926 (45.1), 254 SMO (43.3), Super duplex 2507 (42.1). They are super-austenitic and super duplex grades. Results in service also depend on chloride level, temperature and surface condition.
What temperature can stainless steel withstand?
It depends on the grade. In dry air 304 and 316 resist scaling up to about 925 °C in continuous and 870 °C in intermittent service; long exposure at 425–860 °C can lower their wet corrosion resistance. The highest values belong to heat-resisting grades: 1.4835 (1150 °C), 314 (1150 °C), 1.4762 (1150 °C), 310S (1050 °C). Duplex grades are not used above about 250 °C because of embrittlement.
Which stainless steels are magnetic?
Ferritic, martensitic, duplex and PH grades are magnetic. Annealed austenitic grades (304, 316) are not; slight magnetism can appear after cold work.
How can you tell the grade of stainless steel?
The grade is set by composition and cannot be told by eye. A magnet only separates families: annealed 304 is not magnetic and 430 is, though cold-worked 304 can be slightly magnetic. A reliable answer comes from the heat analysis on the EN 10204 3.1 inspection certificate or from a spectrometer (PMI) test.