PRECISION IN MATERIAL. CLARITY IN SUPPLY.

PRODUCT DIMENSIONS AND ORDERING

What sets the price of stainless steel?

The two parts of a stainless steel price per kg, the alloy surcharge that changes every month, the relative alloy cost of 304, 316 and other grades, and how size, quantity, cutting and certificates affect the price.

On this page

A price has two parts

In Europe a stainless steel price usually has two parts: the base price and the alloy surcharge. The base price reflects production, processing, product form and market conditions. The alloy surcharge covers the cost of expensive elements in the steel such as nickel, chromium and molybdenum.

Producers publish the alloy surcharge every month, grade by grade, from the metal prices of the previous period. This is why the price per kg of the same grade changes from month to month; the question “what does 304 cost per kg” has no single, fixed answer.

Alloy cost by grade

Most of the price difference between grades comes from the alloy surcharge. The table below compares the 12-month average surcharge with that of 304, the most common grade, and states the difference in plain words. Size, quantity and cutting are not included, so this is an estimate; the exact price is set by a quotation.

316 costs more than 304 because of its 2–3% molybdenum and somewhat higher nickel. Ferritic 430 contains no nickel and is among the most economical grades. In highly alloyed grades such as 904L and 254 SMO, nickel and molybdenum rise together and the cost exceeds three times that of 304.

Grade / ENEstimated price vs 304Alloying elements that drive the cost
430 / 1.401650% cheaperChromium
441 / 1.450940% cheaperChromium, niobium, titanium
2101 / 1.416225% cheaperChromium, manganese, little nickel
301 / 1.43105% cheaperChromium, nickel
304 and 304L / 1.4301, 1.4307about the sameChromium, nickel
2304 / 1.4362about the sameChromium, nickel, nitrogen
321 / 1.454110% dearerChromium, nickel, titanium
444 / 1.452110% dearerChromium, molybdenum
2205 / 1.446265% dearerChromium, molybdenum, nickel
316 and 316L / 1.4401, 1.440475% dearerNickel, molybdenum, chromium
316Ti / 1.457175% dearerNickel, molybdenum, chromium
310S / 1.484575% dearerNickel, chromium
904L / 1.45393.1× the priceHigh nickel, molybdenum, copper
254 SMO / 1.45473.2× the priceHigh nickel, molybdenum, chromium
Sources and technical details

The estimate compares the average monthly alloy surcharge December 2025 – November 2026 with that of 304 (254 SMO: January–November 2026); percentages are rounded to 5. Base price, size, quantity and cutting are not included.

legierungszuschlag.info — monthly alloy surcharges (December 2025 – November 2026) — Monthly surcharges by grade based on prices published by producers in Germany; 12-month average, 304 = 1.

Outokumpu — Monthly Alloy Surcharges for Flat products, December 2024 (PDF) — Cross-check of the ratios: 316L/304 1.67, 430/304 0.50, 2205/304 1.60.

Other factors that change the price

Within the same grade the price depends on the details of the order. When comparing quotations, make sure the points below are the same.

  • Product form and size: bar, flat, sheet or tube; very thin or very thick sizes need extra processing.

  • Quantity: for small quantities, cutting and handling weigh more per kg.

  • Cutting and tolerance: cutting to size, tight tolerances and surface work add to the price.

  • Surface: 2B, bright annealed (BA), brushed or ground finishes are priced differently.

  • Certificate and traceability: an EN 10204 3.1 inspection certificate and lot tracking show that the grade is really delivered.

  • Origin and lead time: the place of production, stock and lead time affect the price.

What to include in a request for quotation

For an accurate price, state the grade (EN number and AISI), product form, dimensions and tolerance, quantity, the required standard and certificate together. If you are unsure about the grade, describing the application and environment is enough; we can choose a suitable grade together.