PRECISION IN MATERIAL. CLARITY IN SUPPLY.

GRADE COMPARISON

321 vs 316 stainless steel

321 is a titanium-stabilised austenitic stainless steel; 316 contains 2–2.5% molybdenum. Molybdenum gives 316 better pitting resistance in chlorides (PREN 23.1–28.4 against 17–19). The strength of 321 is high temperature: it keeps its resistance to intergranular corrosion after long exposure above 425 °C.

Grades to compare

GRADE 1

321

Stainless Steel · 1.4541 · S32100

GRADE 2

316

Stainless Steel · 1.4401 · S31600

Common comparisons:Duplex 2205 – 316L316Ti – 316L304 – 32117-4 PH – 316410 – 420904L – 316L303 – 4164130 – 4140304 – 310S254 SMO – 904L420 – 440C

Key differences

WHERE IT LEADS321

Estimated price: reference

No property where it leads

WHERE IT LEADS316

Estimated price: 60% dearer than 321

  • Corrosion resistance

Equal: Strength · Machinability · Weldability · Heat resistance

Property differences

Corrosion resistance

316 better

321
PREN 18.0
316
PREN 25.7

More resistant to pitting; the difference shows in chlorides (salt water, marine air).

Main composition differences

Molybdenum (Mo)

316 contains it, 321 does not

321
none
316
2–2.5

Improves resistance to pitting and crevice corrosion in chlorides.

Nickel (Ni)

More in 316

321
9–12
316
10–13

Stabilises the austenitic structure; improves toughness and formability.

Chromium (Cr)

More in 321

321
17–19
316
16.5–18.5

The element that makes steel stainless; more chromium means better corrosion resistance.

Property321316
Corrosion3/5PREN 18.04/5PREN 25.7
Strength1/5250 MPa · plate, annealed1/5260 MPa · plate, annealed
Machinability3/5steel type class3/5steel type class
Welding5/5steel type class5/5steel type class
Heat4/5925 °C · continuous, in air4/5925 °C · continuous, in air
Estimated price (vs 321)reference60% dearer
Critical pitting temperature (ASTM G48 E)–20 °C
Critical crevice temperature (ASTM G48 F)–<0 °C
Tensile strength (Rm)570 MPa570 MPa
Elongation55 %55 %
Hardness165 HB170 HB
HardeningNone (cold work)None (cold work)
MagneticNoNo
Material groupStainless SteelStainless Steel
Material no. (W.Nr)1.45411.4401
EN nameX6CrNiTi18-10X5CrNiMo17-12-2
AISI321316
UNSS32100S31600
JISSUS321SUS316
Density7.9 g/cm³8 g/cm³
PREN17–1923.1–28.4

Ratings are the sourced values of the stainless steel grade chart. Rm, elongation and hardness: Outokumpu typical values at room temperature (HB hot-rolled, HRB cold-rolled product). Grade chart · Hardness conversion

Critical temperatures: Outokumpu Handbook (2013) Table 6:1 typical values; higher is better. They rank grades in a standard test and are not a service limit.

Estimated price: based on the 12-month average alloy surcharge; size, quantity and cutting are not included. How is the price set? · Request a quotation

Chemical composition, %
Element321316
C≤ 0.08≤ 0.07
Si≤ 1≤ 1
Mn≤ 2≤ 2
P≤ 0.045≤ 0.045
S≤ 0.03≤ 0.03
Cr17–1916.5–18.5▼
Ni9–1210–13▲
Mo–2–2.5▲
N–≤ 0.1
Ti5 × C ≤ Ti ≤ 0.70–

Arrows mark elements markedly higher (▲) or lower (▼) than in grade 1. Values are the composition limits on the grade pages.

Physical properties · 20 °C
Property321316
Modulus of elasticity, GPa200200
Thermal expansion 20–200 °C, 10⁻⁶/K16.516.5
Thermal expansion 20–400 °C, 10⁻⁶/K17.517.5
Thermal conductivity, W/(m·K)1515
Specific heat, J/(kg·K)500500
Electrical resistivity, Ω·mm²/m0.730.75

Source: EN 10088-1:2005 (Euro Inox tables of technical properties). Values are for the annealed condition at 20 °C. Thermal expansion calculator

Alternatives to 321

The compositionally closest grades in the same material group. Choose one to open it as grade 2.

A close composition does not make a grade a direct substitute; check mechanical properties, the product standard and the specification.

321 – 316: Cr, Ni, Mo

Frequently asked questions

Should I choose 321 or 316?

Choose 316 where the part meets salt water, marine air or chloride chemicals. Choose 321 where it works for long periods at 425–860 °C, as in exhausts, furnaces or hot lines.

Can 316L replace 321?

Often yes for welded parts near room temperature, as the low carbon of 316L prevents corrosion after welding. For parts working continuously in the sensitisation range, titanium-stabilised 321 is safer.

Is 321 or 316 more expensive?

316 is usually dearer because of its molybdenum; from the last 12 months of alloy surcharges the estimated difference is about 60%. The exact price depends on size and quantity.