THERMAL EXPANSION
Thermal expansion calculator and coefficient table
Choose the material, enter the length and two temperatures, and calculate how much the part grows or shrinks. The same calculation applies to a pipe, bar, section or diameter. Coefficients follow EN 10088-1 and the Eurocodes.
Material and size
Grades covered: 1.4301, 1.4307, 1.4305, 1.4541, 1.4550, 1.4401, 1.4404. Valid range -50 °C to 500 °C; source: EN 10088-1. The same calculation applies to a diameter, wall thickness or any linear dimension.
ΔL = L₀ × α × ΔT
Length change
- Final length
- 6.00576 m
- Mean coefficient
- 16 × 10⁻⁶/K
Coefficient of thermal expansion table
Mean coefficients of linear thermal expansion between 20 °C and the given temperature, in 10⁻⁶/K (µm/(m·K)). Carbon steel values are calculated from the EN 1993-1-2 thermal elongation formula; a dash means the source gives no value for that range.
Mean coefficient of thermal expansion, 10⁻⁶/Kbetween 20 °C and 100 … 500 °C
| Material | 20–100 °C | 20–200 °C | 20–300 °C | 20–400 °C | 20–500 °C | Grades | Source |
|---|---|---|---|---|---|---|---|
| Carbon and low-alloy steel | 12.5 | 12.9 | 13.3 | 13.7 | 14.1 | S235, S355, C45, 42CrMo4… | EN 1993-1-2 / EN 1993-1-1 |
| Austenitic stainless (304, 316) | 16.0 | 16.5 | 17.0 | 17.5 | 18.0 | 1.4301, 1.4307, 1.4305, 1.4541, 1.4550, 1.4401, 1.4404 | EN 10088-1 |
| Super austenitic stainless (6% Mo) | 16.5 | 17.0 | 17.5 | 18.0 | 18.0 | 1.4547 (254 SMO) | EN 10088-1 |
| Duplex stainless (2205) | 13.0 | 13.5 | 14.0 | – | – | 1.4462 | EN 10088-1 |
| Ferritic stainless (430) | 10.0 | 10.0 | 10.5 | 10.5 | 11.0 | 1.4016 | EN 10088-1 |
| Ferritic stainless (444) | 10.4 | 10.8 | 11.2 | 11.6 | 11.9 | 1.4521 | EN 10088-1 |
| Martensitic stainless (410, 420) and 410S | 10.5 | 11.0 | 11.5 | 12.0 | – | 1.4006, 1.4005, 1.4021, 1.4000 | EN 10088-1 |
| Precipitation hardening stainless (17-4 PH) | 10.9 | 11.1 | 11.1 | – | – | 1.4542 | EN 10088-1 |
| Aluminium alloys | 23.0 | – | – | – | – | EN AW-6060, 6061, 6082, 5083, 7075… | EN 1999-1-1 |
| Titanium grade 2 | 8.6 | – | – | – | – | 3.7035 | Rolled Alloys, amesweb |
What is thermal expansion?
Thermal expansion is the growth of a metal’s dimensions as it heats up and their shrinkage as it cools. All linear dimensions such as length, diameter and wall thickness change by the same ratio. The coefficient of thermal expansion (α) gives the change per unit length for one degree of temperature change.
Thermal expansion formula and unit
The length change is ΔL = L₀ × α × ΔT, where L₀ is the initial length, ΔT the temperature difference (°C or K) and α the mean coefficient of expansion. The unit is 10⁻⁶/K, the same as micrometres per metre per degree (µm/(m·K)). With α = 16 × 10⁻⁶/K, one metre grows by 16 µm for each degree.
The coefficient rises with temperature, so tables give the mean value between 20 °C and a given temperature (e.g. 20–100 °C, 20–300 °C). The calculator uses each material’s thermal strain relative to 20 °C; the change between two temperatures is the difference of these strains.
Pipe expansion example
A 6 m pipe installed at 20 °C and heated to 80 °C grows by about 5.76 mm in austenitic stainless steel (304, 316), 4.46 mm in carbon steel and 8.28 mm in aluminium. Stainless steel expands about a third more than carbon steel; piping has to take up this movement with expansion joints, sliding supports or loops.
Where the coefficients come from
Stainless steel values are the EN 10088-1 mean coefficients between 20 °C and 100–500 °C. For carbon steel the EN 1993-1-2 thermal elongation formula is used for 20–750 °C and 12 × 10⁻⁶/K from EN 1993-1-1 below 20 °C. Aluminium uses 23 × 10⁻⁶ per °C from EN 1999-1-1 and titanium grade 2 uses 8.6 × 10⁻⁶/K from producer data. Below 20 °C the 20–100 °C coefficient is used for stainless steel, aluminium and titanium, so the result there is approximate.
The values represent a material group; grades within a group can differ slightly. For precision applications, use the producer’s grade-specific data.
Frequently asked questions
How do you calculate thermal expansion?
ΔL = L₀ × α × ΔT: multiply the initial length, the material’s mean coefficient and the temperature difference. For example, 1000 mm of stainless steel (α = 16 × 10⁻⁶/K) heated by 50 °C grows by 1000 × 16 × 10⁻⁶ × 50 = 0.8 mm.
What is the coefficient of thermal expansion of steel?
For carbon and low-alloy steel, EN 1993-1-1 gives α = 12 × 10⁻⁶/K up to 100 °C. The mean coefficient rises at higher temperatures; the calculator uses the EN 1993-1-2 formula.
What is the thermal expansion coefficient of stainless steel?
Per EN 10088-1, austenitic grades such as 304 and 316 have a mean coefficient of 16.0 × 10⁻⁶/K for 20–100 °C and 18.0 × 10⁻⁶/K for 20–500 °C. Duplex 2205 has 13.0 and ferritic 430 has 10.0 × 10⁻⁶/K (20–100 °C).
What is the coefficient of thermal expansion of aluminium?
EN 1999-1-1 gives α = 23 × 10⁻⁶ per °C for aluminium alloys, about twice that of steel; when steel and aluminium are combined, temperature changes cause different elongations.
How much does a 6 m pipe expand?
A 6 m pipe heated from 20 °C to 80 °C grows by about 5.76 mm in austenitic stainless steel, 4.46 mm in carbon steel and 8.28 mm in aluminium.
What is the unit of the coefficient of thermal expansion?
10⁻⁶/K (or 10⁻⁶/°C), the same as µm/(m·K): 16 × 10⁻⁶/K means one metre grows by 16 micrometres per degree.