More in 316Ti
- 316Ti
- ≤ 0.08
- 316L
- ≤ 0.03
Raises strength and hardenability. Low carbon reduces the risk of intergranular corrosion after welding.
GRADE COMPARISON
316Ti and 316L share the same chromium-nickel-molybdenum base; they differ in how intergranular corrosion after welding is prevented. 316L limits carbon to 0.03%, while 316Ti binds carbon with titanium (Ti ≥ 5 × C). Corrosion resistance and annealed strength are practically the same.
Stainless Steel · 1.4571 · S31635
Stainless Steel · 1.4404 · S31603
No property where it leads
No property where it leads
Equal: Corrosion resistance · Strength · Machinability · Weldability
More in 316Ti
Raises strength and hardenability. Low carbon reduces the risk of intergranular corrosion after welding.
More in 316Ti
Stabilises the austenitic structure; improves toughness and formability.
More in 316L
Improves resistance to pitting and crevice corrosion in chlorides.
| Property | 316Ti | 316L |
|---|---|---|
| Corrosion | ||
| Strength | ||
| Machinability | ||
| Welding | ||
| Heat | ||
| Critical pitting temperature (ASTM G48 E) | – | 20 °C |
| Critical crevice temperature (ASTM G48 F) | – | <0 °C |
| Tensile strength (Rm) | 570 MPa | 570 MPa |
| Elongation | 50 % | 55 % |
| Hardness | 170 HB | 170 HB |
| Hardening | None (cold work) | None (cold work) |
| Magnetic | No | No |
| Material group | Stainless Steel | Stainless Steel |
| Material no. (W.Nr) | 1.4571 | 1.4404 |
| EN name | X6CrNiMoTi17-12-2 | X2CrNiMo17-12-2 |
| AISI | 316Ti | 316L |
| UNS | S31635 | S31603 |
| JIS | SUS316Ti | SUS316L |
| Density | 8 g/cm³ | 8 g/cm³ |
| PREN | 23.1–26.8 | 23.1–30 |
Ratings are the sourced values of the stainless steel grade chart. Rm, elongation and hardness: Outokumpu typical values at room temperature (HB hot-rolled, HRB cold-rolled product). Grade chart · Hardness conversion
Critical temperatures: Outokumpu Handbook (2013) Table 6:1 typical values; higher is better. They rank grades in a standard test and are not a service limit.
| Element | 316Ti | 316L |
|---|---|---|
| C | ≤ 0.08 | ≤ 0.03▼ |
| Si | ≤ 1 | ≤ 1 |
| Mn | ≤ 2 | ≤ 2 |
| P | ≤ 0.045 | ≤ 0.045 |
| S | ≤ 0.03 | ≤ 0.03 |
| Cr | 16.5–18.5 | 16.5–18.5 |
| Ni | 10.5–13.5 | 10–13▼ |
| Mo | 2–2.5 | 2–3▲ |
| N | – | ≤ 0.1 |
| Ti | 5 × C ≤ Ti ≤ 0.70 | – |
Arrows mark elements markedly higher (▲) or lower (▼) than in grade 1. Values are the composition limits on the grade pages.
| Property | 316Ti | 316L |
|---|---|---|
| Modulus of elasticity, GPa | 200 | 200 |
| Thermal expansion 20–200 °C, 10⁻⁶/K | 17.5 | 16.5 |
| Thermal expansion 20–400 °C, 10⁻⁶/K | 18.5 | 17.5 |
| Thermal conductivity, W/(m·K) | 15 | 15 |
| Specific heat, J/(kg·K) | 500 | 500 |
| Electrical resistivity, Ω·mm²/m | 0.75 | 0.75 |
Source: EN 10088-1:2005 (Euro Inox tables of technical properties). Values are for the annealed condition at 20 °C. Thermal expansion calculator
The compositionally closest grades in the same material group. Choose one to open it as grade 2.
A close composition does not make a grade a direct substitute; check mechanical properties, the product standard and the specification.
In most applications, yes: both resist intergranular corrosion after welding, and 1.4571 is often named as an alternative to 1.4404. If a specification or pressure equipment approval names one grade, the change needs approval.
Neither is better overall. 316L polishes better, since titanium carbonitrides in 316Ti can mark a polished surface. 316Ti is more common in German-origin specifications and parts working at elevated temperature.
No. 316Ti and 316L are austenitic and not magnetic when annealed; slight magnetism can appear after cold forming.