More in 321
- 304
- 8–10.5
- 321
- 9–12
Stabilises the austenitic structure; improves toughness and formability.
GRADE COMPARISON
321 is a titanium-stabilised variant of 304. Because titanium binds carbon, 321 keeps its resistance to intergranular corrosion even after long exposure at about 425–815 °C. At room temperature, corrosion resistance and strength are close.
Stainless Steel · 1.4301 · S30400
Stainless Steel · 1.4541 · S32100
Estimated price: reference
No property where it leads
Estimated price: 10% dearer than 304
No property where it leads
Equal: Corrosion resistance · Strength · Machinability · Weldability · Heat resistance
More in 321
Stabilises the austenitic structure; improves toughness and formability.
More in 304
The element that makes steel stainless; more chromium means better corrosion resistance.
| Property | 304 | 321 |
|---|---|---|
| Corrosion | ||
| Strength | ||
| Machinability | ||
| Welding | ||
| Heat | ||
| Estimated price (vs 304) | reference | 10% dearer |
| Critical pitting temperature (ASTM G48 E) | 10 °C | – |
| Critical crevice temperature (ASTM G48 F) | <0 °C | – |
| Tensile strength (Rm) | 600 MPa | 570 MPa |
| Elongation | 55 % | 55 % |
| Hardness | 175 HB | 165 HB |
| Hardening | None (cold work) | None (cold work) |
| Magnetic | No | No |
| Material group | Stainless Steel | Stainless Steel |
| Material no. (W.Nr) | 1.4301 | 1.4541 |
| EN name | X5CrNi18-10 | X6CrNiTi18-10 |
| AISI | 304 | 321 |
| UNS | S30400 | S32100 |
| JIS | SUS304 | SUS321 |
| Density | 7.9 g/cm³ | 7.9 g/cm³ |
| PREN | 17.5–21.1 | 17–19 |
Ratings are the sourced values of the stainless steel grade chart. Rm, elongation and hardness: Outokumpu typical values at room temperature (HB hot-rolled, HRB cold-rolled product). Grade chart · Hardness conversion
Critical temperatures: Outokumpu Handbook (2013) Table 6:1 typical values; higher is better. They rank grades in a standard test and are not a service limit.
Estimated price: based on the 12-month average alloy surcharge; size, quantity and cutting are not included. How is the price set? · Request a quotation
| Element | 304 | 321 |
|---|---|---|
| C | ≤ 0.07 | ≤ 0.08 |
| Si | ≤ 1 | ≤ 1 |
| Mn | ≤ 2 | ≤ 2 |
| P | ≤ 0.045 | ≤ 0.045 |
| S | ≤ 0.03 | ≤ 0.03 |
| Cr | 17.5–19.5 | 17–19▼ |
| Ni | 8–10.5 | 9–12▲ |
| N | ≤ 0.1 | – |
| Ti | – | 5 × C ≤ Ti ≤ 0.70 |
Arrows mark elements markedly higher (▲) or lower (▼) than in grade 1. Values are the composition limits on the grade pages.
| Property | 304 | 321 |
|---|---|---|
| Modulus of elasticity, GPa | 200 | 200 |
| Thermal expansion 20–200 °C, 10⁻⁶/K | 16.5 | 16.5 |
| Thermal expansion 20–400 °C, 10⁻⁶/K | 17.5 | 17.5 |
| Thermal conductivity, W/(m·K) | 15 | 15 |
| Specific heat, J/(kg·K) | 500 | 500 |
| Electrical resistivity, Ω·mm²/m | 0.73 | 0.73 |
Source: EN 10088-1:2005 (Euro Inox tables of technical properties). Values are for the annealed condition at 20 °C. Thermal expansion calculator
The compositionally closest grades in the same material group. Choose one to open it as grade 2.
A close composition does not make a grade a direct substitute; check mechanical properties, the product standard and the specification.
When 304 stays at 425–815 °C for long periods, chromium carbides form at grain boundaries and corrosion resistance drops. Titanium in 321 prevents this, so it is preferred for exhaust systems, expansion joints and heat-treatment equipment.
Both resist intergranular corrosion after welding. 304L is enough near room temperature; 321 is safer for continuous service in the sensitisation range.
Not for general corrosion: PREN values are close (17.5–21.1 for 304, 17–19 for 321). The advantage of 321 is against intergranular corrosion after high-temperature exposure.