WEIGHT CALCULATOR
Sheet metal weight calculator
Calculate sheet and plate weight from thickness, width, length and quantity; the result also gives weight per square metre. kg/m² and standard sheet size charts follow.
Material selection
A general estimate for this material. Selecting a grade can provide a more specific density.
Custom density
Dimensions and quantity
Other
Leave empty to calculate weight only. The price is used for this calculation alone; no currency conversion is applied. Request a current price
Width is across the sheet; length is the piece length. Weight per square metre is shown too.
How is the weight calculated?
The section area is multiplied by density to find kg/m. Piece weight uses the entered length; total weight also includes quantity.
width × thickness = section area (mm²)
Area × density / 1000 = kg/m
kg/m × length (mm) / 1000 × quantity = total kgStainless steels
- Weight per metre
- 16 kg/m
- Weight per piece
- 16 kg
- Weight per m²
- 16 kg/m²
- Density used
- 8 g/cm³
A theoretical estimate. Actual dimensions, tolerances and material properties can change the measured weight.
Sheet and plate weight chart
Theoretical weight from nominal dimensions and the typical densities used by the calculator (g/cm³ in brackets). Actual weight varies with size tolerance and grade; use these values for estimates, not for invoicing.
Sheet and plate weight chart (kg/m²)Carbon steel · 304 / 304L · 316L · Duplex 2205 · Aluminium 5083 · Titanium Grade 2 · kg/m² · 0.5–50 mm
| Thickness (mm) | Carbon steel (7.85) | 304 / 304L (7.90) | 316L (8.00) | Duplex 2205 (7.80) | Aluminium 5083 (2.66) | Titanium Grade 2 (4.51) |
|---|---|---|---|---|---|---|
| 0.5 | 3.93 | 3.95 | 4.00 | 3.90 | 1.33 | 2.26 |
| 0.8 | 6.28 | 6.32 | 6.40 | 6.24 | 2.13 | 3.61 |
| 1 | 7.85 | 7.90 | 8.00 | 7.80 | 2.66 | 4.51 |
| 1.2 | 9.42 | 9.48 | 9.60 | 9.36 | 3.19 | 5.41 |
| 1.5 | 11.77 | 11.85 | 12.00 | 11.70 | 3.99 | 6.77 |
| 2 | 15.70 | 15.80 | 16.00 | 15.60 | 5.32 | 9.02 |
| 2.5 | 19.63 | 19.75 | 20.00 | 19.50 | 6.65 | 11.27 |
| 3 | 23.55 | 23.70 | 24.00 | 23.40 | 7.98 | 13.53 |
| 4 | 31.40 | 31.60 | 32.00 | 31.20 | 10.64 | 18.04 |
| 5 | 39.25 | 39.50 | 40.00 | 39.00 | 13.30 | 22.55 |
| 6 | 47.10 | 47.40 | 48.00 | 46.80 | 15.96 | 27.06 |
| 8 | 62.80 | 63.20 | 64.00 | 62.40 | 21.28 | 36.08 |
| 10 | 78.50 | 79.00 | 80.00 | 78.00 | 26.60 | 45.10 |
| 12 | 94.20 | 94.80 | 96.00 | 93.60 | 31.92 | 54.12 |
| 15 | 117.75 | 118.50 | 120.00 | 117.00 | 39.90 | 67.65 |
| 20 | 157.00 | 158.00 | 160.00 | 156.00 | 53.20 | 90.20 |
| 25 | 196.25 | 197.50 | 200.00 | 195.00 | 66.50 | 112.75 |
| 30 | 235.50 | 237.00 | 240.00 | 234.00 | 79.80 | 135.30 |
| 40 | 314.00 | 316.00 | 320.00 | 312.00 | 106.40 | 180.40 |
| 50 | 392.50 | 395.00 | 400.00 | 390.00 | 133.00 | 225.50 |
Stainless sheet weight by format316L · kg per sheet
| Thickness (mm) | 1000 × 2000 | 1250 × 2500 | 1500 × 3000 |
|---|---|---|---|
| 0.5 | 8.0 | 12.5 | 18.0 |
| 0.8 | 12.8 | 20.0 | 28.8 |
| 1 | 16.0 | 25.0 | 36.0 |
| 1.2 | 19.2 | 30.0 | 43.2 |
| 1.5 | 24.0 | 37.5 | 54.0 |
| 2 | 32.0 | 50.0 | 72.0 |
| 2.5 | 40.0 | 62.5 | 90.0 |
| 3 | 48.0 | 75.0 | 108.0 |
| 4 | 64.0 | 100.0 | 144.0 |
| 5 | 80.0 | 125.0 | 180.0 |
| 6 | 96.0 | 150.0 | 216.0 |
| 8 | 128.0 | 200.0 | 288.0 |
| 10 | 160.0 | 250.0 | 360.0 |
Worked example
- 1500 × 3000 × 3 mm 316L plate: 3 × 8.00 = 24.00 kg/m²; 4,5 m² × 24.00 = 108.0 kg.
Sheet metal weight formula
Sheet weight is width × length × thickness × density. Weight per square metre is simply thickness (mm) × density (g/cm³): 3 mm 304 stainless is 23.70 kg/m² and 3 mm carbon steel 23.55 kg/m². A sheet’s weight is that figure times its area: a 1250 × 2500 × 2 mm 304 sheet is 3.125 m² × 15.80 = 49.4 kg.
Standard sheet sizes
Stainless and aluminium sheets are most often 1000 × 2000, 1250 × 2500 and 1500 × 3000 mm; heavier plate also comes in larger sizes such as 2000 × 6000. Thin sheet is sold in coil too, and cut sheet weight is still worked out from kg/m². Patterned (tread, chequer) plate is heavier than its nominal thickness suggests; the chart is for flat sheet.
Sheet weight formula in Excel
Width in A2, length in B2, thickness in C2 (mm), density (g/cm³) in D2 give the sheet weight in kg:
=A2*B2*C2*D2/1000000Sheet weight by material
At 1 mm thickness the weights per square metre are: carbon steel 7.85 kg/m², 304 stainless 7.90 kg/m², 316L 8.00 kg/m², 2205 duplex 7.80 kg/m², 6082 aluminium 2.70 kg/m², Grade 2 titanium 4.51 kg/m². Thickness tolerance is a larger percentage on thin sheet, so 0.5–1 mm sheet can weigh noticeably differently from the theoretical figure.
Sheet thickness from weight
If a sheet’s thickness is unknown it can be found by weighing: thickness (mm) = weight (kg) ÷ (width (m) × length (m) × density). A 1250 × 2500 mm 304 sheet weighing 74 kg is 3.00 mm thick, so it is 3 mm sheet. A lower weighed value means the sheet sits towards the bottom of its thickness tolerance.
Coil length from weight
For coil, length = weight (kg) ÷ (thickness × width (m) × density). One tonne of 1 mm, 1250 mm wide 304 coil is about 101 metres. Allow separately for core and packaging weight when weighing.
Frequently asked questions
How much does 1 mm stainless sheet weigh per square metre?
7.90 kg/m² in 304 and 8.00 kg/m² in 316L. Weight per square metre is thickness (mm) × density (g/cm³).
How much does a 1250 × 2500 × 2 mm stainless sheet weigh?
50.0 kg in 316L: 1.25 × 2.5 m × 2 mm × 8.0 g/cm³.
What is the sheet metal weight formula?
Sheet weight (kg) = width (m) × length (m) × thickness (mm) × density (g/cm³). Weight per square metre is thickness × density.
How much does carbon steel sheet weigh per square metre?
Carbon steel sheet is 7.85 kg/m² at 1 mm, 15.70 kg/m² at 2 mm and 39.25 kg/m² at 5 mm.
How is aluminium sheet weight calculated?
Use 2.66 g/cm³ for 5083: 2 mm sheet is 5.32 kg/m², a 1250 × 2500 mm sheet 16.6 kg.
How is the weight of coil calculated?
Weight per m² × width (m) × running length (m). For example, 100 m of 1250 mm wide, 2 mm 304 coil is 1975 kg.
How do I calculate sheet price from weight?
Sheet is usually sold by the kilogram, sometimes by the square metre. With a kg price, piece weight (width × length × thickness × density) is multiplied by the price; with a m² price, the sheet area (width × length) is used. Enter the price in the calculator’s “Unit price” field and choose per kg or per m² to see the amount per piece and in total next to the weight.