WEIGHT CALCULATOR
Box section weight and price calculator
Calculate square and rectangular hollow section weight from outside dimensions and wall thickness. Corners use the EN 10219-2 calculation radii; a kg/m chart follows.
Material selection
A general estimate for this material. Selecting a grade can provide a more specific density.
Custom density
Dimensions and quantity
Other
Leave empty to calculate weight only. The price is used for this calculation alone; no currency conversion is applied. Request a current price
Without a radius, the EN 10219-2 calculation radii are used (outer 2t, 2.5t or 3t by wall thickness).
How is the weight calculated?
The section area is multiplied by density to find kg/m. Piece weight uses the entered length; total weight also includes quantity.
2t (B + H − 2t) − (4 − π)(ro² − ri²) = section area (mm²)
Area × density / 1000 = kg/m
kg/m × length (mm) / 1000 × quantity = total kgStainless steels
- Weight per metre
- 2.35 kg/m
- Weight per piece
- 2.35 kg
- Density used
- 8 g/cm³
A theoretical estimate. Actual dimensions, tolerances and material properties can change the measured weight.
Box section weight chart
Theoretical weight from nominal dimensions and the typical densities used by the calculator (g/cm³ in brackets). Actual weight varies with size tolerance and grade; use these values for estimates, not for invoicing.
Box section weight chart (SHS / RHS)Carbon steel · 304 / 304L · 316L · Aluminium 6060 · kg/m · EN 10219-2 corner radii
| Width × height × wall (mm) | Carbon steel (7.85) | 304 / 304L (7.90) | 316L (8.00) | Aluminium 6060 (2.70) |
|---|---|---|---|---|
| 20 × 20 × 2 | 1.050 | 1.056 | 1.070 | 0.361 |
| 25 × 25 × 2 | 1.364 | 1.372 | 1.390 | 0.469 |
| 30 × 30 × 2 | 1.678 | 1.688 | 1.710 | 0.577 |
| 40 × 40 × 2 | 2.306 | 2.320 | 2.350 | 0.793 |
| 40 × 40 × 3 | 3.303 | 3.325 | 3.367 | 1.136 |
| 50 × 50 × 2 | 2.934 | 2.952 | 2.990 | 1.009 |
| 50 × 50 × 3 | 4.245 | 4.273 | 4.327 | 1.460 |
| 60 × 60 × 3 | 5.187 | 5.221 | 5.287 | 1.784 |
| 80 × 80 × 3 | 7.071 | 7.117 | 7.207 | 2.432 |
| 100 × 100 × 4 | 11.73 | 11.81 | 11.96 | 4.036 |
| 40 × 20 × 2 | 1.678 | 1.688 | 1.710 | 0.577 |
| 50 × 30 × 2 | 2.306 | 2.320 | 2.350 | 0.793 |
| 60 × 40 × 3 | 4.245 | 4.273 | 4.327 | 1.460 |
| 80 × 40 × 3 | 5.187 | 5.221 | 5.287 | 1.784 |
| 100 × 50 × 3 | 6.600 | 6.643 | 6.727 | 2.270 |
| 120 × 60 × 4 | 10.48 | 10.54 | 10.68 | 3.604 |
Worked example
- 60 × 40 × 3 mm 304 box section, 6 m: 2 × 3 × (60 + 40 − 6) − (4 − π)(6² − 3²) = 540.8 mm²; 4.27 kg/m; × 6 m = 25.64 kg.
Box section weight formula
With sharp corners a box section’s area is 2t × (B + H − 2t), with B the width, H the height and t the wall. Real sections have rounded corners, so the EN 10219-2 correction (4 − π) × (ro² − ri²) is subtracted. For 40 × 40 × 2 mm the sharp-corner area is 304 mm² and the area with radii 293.7 mm², which is 2.31 kg/m in carbon steel.
EN 10219-2 corner radii
For cold-formed hollow sections the calculation uses an outer corner radius of 2t for walls up to 6 mm, 2.5t from 6 to 10 mm and 3t above 10 mm, with inner radii of t, 1.5t and 2t. At a 2 mm wall the outer radius is 4 mm and the inner 2 mm. Hot-finished (EN 10210) sections have tighter corners and weigh slightly more at the same size. If you know your section’s radius you can enter it in the calculator.
Box section weight formula in Excel
Width in A2, height in B2, wall in C2, outer corner radius in D2, length in E2 (mm), density (g/cm³) in F2:
=(2*C2*(A2+B2-2*C2)-(4-PI())*(D2^2-(D2-C2)^2))*F2/1000*E2/1000Box section weight by material
For 40 × 40 × 2 mm box section the weights per metre are: carbon steel 2.31 kg/m, 304 stainless 2.32 kg/m, 316L 2.35 kg/m, 2205 duplex 2.29 kg/m, 6082 aluminium 0.79 kg/m, Grade 2 titanium 1.32 kg/m. Structural steelwork tables give carbon steel weights (7.85 g/cm³); stainless and aluminium sections need correcting by the density ratio.
Square and rectangular hollow sections
Square and rectangular sections with the same perimeter weigh nearly the same: 50 × 50 × 3 mm (4.25 kg/m) equals 60 × 40 × 3 mm (4.25 kg/m). A rectangular section is stiffer in bending about its deeper side, so a better section can be chosen for the same weight.
From weight to length: box section
To find how many metres you have, divide the total weight by the weight per metre. 40 × 40 × 2 mm carbon steel box section weighs 2.31 kg/m, so 100 kg is about 43.4 metres and one tonne about 434 metres. This is how stock is estimated by weighing instead of counting lengths; size tolerance can shift the result by a few per cent.
Frequently asked questions
How much does 40 × 40 × 2 stainless box section weigh?
2.32 kg/m in 304 stainless, using the EN 10219-2 corner radii (outer 4 mm, inner 2 mm).
Does the corner radius change box section weight?
Slightly. For 40 × 40 × 2 a sharp-corner area is 304 mm² against 293.7 mm² with radii, about 3.4% less.
What is the box section weight formula?
Area = 2t × (B + H − 2t) − (4 − π) × (ro² − ri²); kg/m = area × density ÷ 1000, with ro and ri from the wall thickness per EN 10219-2.
How is rectangular hollow section weight calculated?
With the same formula and different width and height: 60 × 40 × 3 mm carbon steel RHS is 4.25 kg/m.
How much does aluminium box section weigh?
A 40 × 40 × 2 mm 6060 aluminium box section is 0.79 kg/m; extruded sections can have different corner radii.
How do I read the box section weight chart?
Rows are sizes and columns are materials; the number in brackets in each column heading is the density used (g/cm³). Each cell is the weight of one metre (kg/m). Multiply it by the length in metres for one piece and by the quantity for the total.
How do I calculate box section price from weight?
Find the piece weight first, then multiply by the unit price: piece weight × price per kg, or length (m) × price per metre. Enter the price in the calculator’s optional “Unit price” field and choose its unit to see the amount per piece and in total next to the weight; leave it empty to calculate weight only.