PRECISION IN MATERIAL. CLARITY IN SUPPLY.

WEIGHT CALCULATOR

IPE beam weight chart

Choose an IPE beam and enter length and quantity to get its weight. Dimensions and a kg/m chart for IPE 80–600 follow below.

Material selection

Representative material density7.85 g/cm³

A general estimate for this material. Selecting a grade can provide a more specific density.

Custom density

Dimensions and quantity

Other: IPE

Leave empty to calculate weight only. The price is used for this calculation alone; no currency conversion is applied. Request a current price

IPE 200: h 200 · b 100 · tw 5.6 · tf 8.5 · r 12 mm · A 28.5 cm²

How is the weight calculated?

The section area is multiplied by density to find kg/m. Piece weight uses the entered length; total weight also includes quantity.

catalogue mass (kg/m, carbon steel 7.85 g/cm³) × density ÷ 7.85 = kg/m
kg/m × length (mm) / 1000 × quantity = total kg
APPROXIMATE WEIGHTIPE 200

Carbon / structural steel

Total weight
134.4kg
Weight per metre
22.4 kg/m
Weight per piece
134.4 kg
Density used
7.85 g/cm³

A theoretical estimate. Actual dimensions, tolerances and material properties can change the measured weight.

Rolling tolerances of this sectionEnquire about these dimensions

IPE beam weight chart

Dimensions and carbon steel mass from the producer’s catalogue (EN 10365 dimensions; IPN DIN 1025-1, UPN DIN 1026-1). Actual bars vary within the rolling tolerances.

IPE weight chart and dimensionsIPE 80–600 · carbon steel · h, b, tw, tf, r in mm · A cm² · kg/m, 6 m, 12 m
SectionhbtwtfrA (cm²)kg/m6 m (kg)12 m (kg)
IPE 8080.046.03.85.25.07.66.036.072.0
IPE 100100.055.04.15.77.010.38.148.697.2
IPE 120120.064.04.46.37.013.210.462.4124.8
IPE 140140.073.04.76.97.016.412.977.4154.8
IPE 160160.082.05.07.49.020.115.894.8189.6
IPE 180180.091.05.38.09.023.918.8112.8225.6
IPE 200200.0100.05.68.512.028.522.4134.4268.8
IPE 220220.0110.05.99.212.033.426.2157.2314.4
IPE 240240.0120.06.29.815.039.130.7184.2368.4
IPE 270270.0135.06.610.215.045.936.1216.6433.2
IPE 300300.0150.07.110.715.053.842.2253.2506.4
IPE 330330.0160.07.511.518.062.649.1294.6589.2
IPE 360360.0170.08.012.718.072.757.1342.6685.2
IPE 400400.0180.08.613.521.084.566.3397.8795.6
IPE 450450.0190.09.414.621.098.877.6465.6931.2
IPE 500500.0200.010.216.021.0115.590.7544.21088.4
IPE 550550.0210.011.117.224.0134.4106.0636.01272.0
IPE 600600.0220.012.019.024.0156.0122.0732.01464.0

Worked example

  1. IPE 200, 4 lengths of 6 m: 28.5 cm² × 0,785 = 22.4 kg/m; × 6 m × 4 = 537.6 kg.

What is an IPE beam?

IPE is the European parallel-flange I beam, dimensioned in EN 10365 (formerly DIN 1025-5). Its height is about twice its width, making it a light beam for bending. The name gives the nominal height: IPE 200 is 200 mm deep.

Unit weight and cross-section

For hot-rolled sections the unit weight is area × 7.85 ÷ 10 (area in cm², result in kg/m). For IPE 200: 28.5 cm² × 0.785 = 22.37 kg/m, matching the catalogue’s 22.4 kg/m. The area adds up web, flanges and root fillets, which is why section weight comes from the tabulated area rather than a simple rectangle formula.

IPE, HEA and HEB compared

At the same nominal size the three series weigh very differently: IPE 200 is 22.4 kg/m, HEA 200 42.3 kg/m and HEB 200 61.3 kg/m. IPE is a narrow-flange beam; HEA and HEB are wide-flange sections for columns and heavy beams, and HEB has thicker flanges and web than HEA.

Frequently asked questions

How much does IPE 200 weigh per metre?

IPE 200 weighs 22.4 kg/m, so a 6 m length is 134.4 kg and a 12 m length 268.8 kg. Its area is 28.5 cm².

How much does IPE 120 weigh per metre?

IPE 120 weighs 10.4 kg/m, so a 6 m length is 62.4 kg and a 12 m length 124.8 kg. Its area is 13.2 cm².

How much does IPE 100 weigh per metre?

IPE 100 weighs 8.1 kg/m, so a 6 m length is 48.6 kg and a 12 m length 97.2 kg. Its area is 10.3 cm².

How much does IPE 300 weigh per metre?

IPE 300 weighs 42.2 kg/m, so a 6 m length is 253.2 kg and a 12 m length 506.4 kg. Its area is 53.8 cm².

How do I read the IPE beam weight chart?

Each row is one section size. h is the height, b the flange width, tw the web and tf the flange thickness, r the root radius (mm) and A the area (cm²). The kg/m column is the carbon steel weight per metre; the 6 m and 12 m columns give the weight of one length.

How is stainless IPE beam weight calculated?

Multiply the carbon steel value by the density ratio: × 7.90 / 7.85 for 304 (about 0.6% more) and × 8.00 / 7.85 for 316L (about 1.9% more). The material option in the calculator does this for you.

How do I calculate IPE price from weight?

Find the piece weight first, then multiply by the unit price: piece weight × price per kg, or length (m) × price per metre. If you have a price per tonne, divide it by 1000 to get the price per kg. Enter the price in the calculator’s optional “Unit price” field and choose its unit to see the amount per piece and in total next to the weight; leave it empty to calculate weight only.