PRECISION IN MATERIAL. CLARITY IN SUPPLY.

WEIGHT CALCULATOR

Hexagon bar weight and price calculator

Calculate hexagon bar weight from the across-flats size, the distance between opposite flat faces. A kg/m chart for 304, 316L and 6082 follows below.

Material selection

Representative material density8 g/cm³

A general estimate for this material. Selecting a grade can provide a more specific density.

Custom density

Dimensions and quantity

Other

Leave empty to calculate weight only. The price is used for this calculation alone; no currency conversion is applied. Request a current price

Across flats is the distance between opposite parallel faces, not opposite corners.

How is the weight calculated?

The section area is multiplied by density to find kg/m. Piece weight uses the entered length; total weight also includes quantity.

√3 × a² / 2 = section area (mm²)
Area × density / 1000 = kg/m
kg/m × length (mm) / 1000 × quantity = total kg
APPROXIMATE WEIGHTHexagon

Stainless steels

Total weight
6.235kg
Weight per metre
6.235 kg/m
Weight per piece
6.235 kg
Density used
8 g/cm³

A theoretical estimate. Actual dimensions, tolerances and material properties can change the measured weight.

Calculate tolerance for these dimensionsEnquire about these dimensions

Hexagon bar weight chart

Theoretical weight from nominal dimensions and the typical densities used by the calculator (g/cm³ in brackets). Actual weight varies with size tolerance and grade; use these values for estimates, not for invoicing.

Hexagon bar weight chart (across flats)Carbon steel · 304 / 304L · 316L · Aluminium 6082 · kg/m · 8–60 mm
Across flats (mm)Carbon steel (7.85)304 / 304L (7.90)316L (8.00)Aluminium 6082 (2.70)
80.4350.4380.4430.150
100.6800.6840.6930.234
120.9790.9850.9980.337
141.3321.3411.3580.458
171.9651.9772.0020.676
192.4542.4702.5010.844
223.2903.3113.3531.132
243.9163.9413.9911.347
274.9564.9885.0511.705
306.1186.1576.2352.104
326.9617.0067.0942.394
368.8118.8678.9793.030
4111.4311.5011.653.931
4614.3914.4814.664.948
5017.0017.1017.325.846
6024.4724.6324.948.418

Worked example

  1. 30 mm across-flats 6082 aluminium hexagon, 10 pieces × 3 m: √3 ÷ 2 × 30² = 779.4 mm²; 2.104 kg/m; total 63.13 kg.

Hexagon bar weight formula

A hexagon’s cross-section is √3 ÷ 2 × s², where s is the across-flats size. At 30 mm across flats the area is 779.4 mm², which is 6.16 kg/m in 304 stainless. That is about 10% heavier than a round bar and about 13% lighter than a square bar of the same size.

Across flats versus across corners

Hexagon bar is always specified across flats, the distance between two opposite faces. Across corners is 2 ÷ √3 times larger: about 34.6 mm for 30 mm across flats. Using the corner size in the formula overstates the weight by about 33%.

Hexagon bar weight formula in Excel

With across flats (mm) in A2, length (mm) in B2 and density (g/cm³) in C2, the piece weight is:

=SQRT(3)/2*A2^2*C2/1000*B2/1000

Hexagon bar weight by material

At 30 mm across flats the weights per metre are: carbon steel 6.12 kg/m, 304 stainless 6.16 kg/m, 316L 6.24 kg/m, 2205 duplex 6.08 kg/m, 6082 aluminium 2.10 kg/m, Grade 2 titanium 3.52 kg/m. Free-machining stainless grades (303, 416) are very close to 304 in density, so the same formula applies to unions and nut bodies turned in series.

Common hexagon sizes

Hexagon bar is mostly made in the same sizes as nut and bolt-head wrench sizes: 10, 13, 17, 19, 22, 24, 27, 30, 32, 36, 41 and 46 mm, for example. Turning unions, nipples or special nut bodies from hexagon stock removes the need to machine wrench flats and cuts swarf.

From weight to length: hexagon bar

To find how many metres you have, divide the total weight by the weight per metre. 24 mm across-flats 304 hexagon bar weighs 3.94 kg/m, so 100 kg is about 25.4 metres and one tonne about 254 metres. This is how stock is estimated by weighing instead of counting lengths; size tolerance can shift the result by a few per cent.

Frequently asked questions

How much does a 30 mm across-flats hexagon bar weigh?

6.16 kg/m in 304 stainless. The area is √3 ÷ 2 × 30² = 779.4 mm².

Which size is used for hexagon bar weight?

Across flats, the distance between two opposite flat faces. Across corners is larger: about 34.6 mm for 30 mm across flats.

What is the hexagon bar weight formula?

kg/m = √3 ÷ 2 × across flats² × density ÷ 1000. For steels, across flats² × 0.0068 kg/m is a close shortcut.

How much does carbon steel hexagon bar weigh?

Carbon steel hexagon bar is 3.92 kg/m at 24 mm and 6.12 kg/m at 30 mm across flats.

How do I read the hexagon bar weight chart?

Rows are sizes and columns are materials; the number in brackets in each column heading is the density used (g/cm³). Each cell is the weight of one metre (kg/m). Multiply it by the length in metres for one piece and by the quantity for the total.

Can I calculate brass hexagon bar weight?

Yes. Enter the producer’s density for your brass alloy in the custom density field; the formula is the same.

How do I calculate hexagon bar price from weight?

Find the piece weight first, then multiply by the unit price: piece weight × price per kg, or length (m) × price per metre. Enter the price in the calculator’s optional “Unit price” field and choose its unit to see the amount per piece and in total next to the weight; leave it empty to calculate weight only.