PRECISION IN MATERIAL. CLARITY IN SUPPLY.

WEIGHT CALCULATOR

HEB beam weight chart

Choose a wide-flange HEB beam and enter length and quantity to get its weight. Dimensions and a kg/m chart for HEB 100–1000 follow below.

Material selection

Representative material density7.85 g/cm³

A general estimate for this material. Selecting a grade can provide a more specific density.

Custom density

Dimensions and quantity

Other: HEB

Leave empty to calculate weight only. The price is used for this calculation alone; no currency conversion is applied. Request a current price

HEB 200: h 200 · b 200 · tw 9 · tf 15 · r 18 mm · A 78.1 cm²

How is the weight calculated?

The section area is multiplied by density to find kg/m. Piece weight uses the entered length; total weight also includes quantity.

catalogue mass (kg/m, carbon steel 7.85 g/cm³) × density ÷ 7.85 = kg/m
kg/m × length (mm) / 1000 × quantity = total kg
APPROXIMATE WEIGHTHEB 200

Carbon / structural steel

Total weight
367.8kg
Weight per metre
61.3 kg/m
Weight per piece
367.8 kg
Density used
7.85 g/cm³

A theoretical estimate. Actual dimensions, tolerances and material properties can change the measured weight.

Rolling tolerances of this sectionEnquire about these dimensions

HEB beam weight chart

Dimensions and carbon steel mass from the producer’s catalogue (EN 10365 dimensions; IPN DIN 1025-1, UPN DIN 1026-1). Actual bars vary within the rolling tolerances.

HEB weight chart and dimensionsHEB 100–1000 · carbon steel · h, b, tw, tf, r in mm · A cm² · kg/m, 6 m, 12 m
SectionhbtwtfrA (cm²)kg/m6 m (kg)12 m (kg)
HEB 100100.0100.06.010.012.026.020.4122.4244.8
HEB 120120.0120.06.511.012.034.026.7160.2320.4
HEB 140140.0140.07.012.012.043.033.7202.2404.4
HEB 160160.0160.08.013.015.054.342.6255.6511.2
HEB 180180.0180.08.514.015.065.351.2307.2614.4
HEB 200200.0200.09.015.018.078.161.3367.8735.6
HEB 220220.0220.09.516.018.091.071.5429.0858.0
HEB 240240.0240.010.017.021.0106.083.2499.2998.4
HEB 260260.0260.010.017.524.0118.493.0558.01116.0
HEB 280280.0280.010.518.024.0131.4103.0618.01236.0
HEB 300300.0300.011.019.027.0149.1117.0702.01404.0
HEB 320320.0300.011.520.527.0161.3127.0762.01524.0
HEB 340340.0300.012.021.527.0170.9134.0804.01608.0
HEB 360360.0300.012.522.527.0180.6142.0852.01704.0
HEB 400400.0300.013.524.027.0197.8155.0930.01860.0
HEB 450450.0300.014.026.027.0218.0171.01026.02052.0
HEB 500500.0300.014.528.027.0238.6187.01122.02244.0
HEB 550550.0300.015.029.027.0254.1199.01194.02388.0
HEB 600600.0300.015.530.027.0270.0212.01272.02544.0
HEB 650650.0300.016.031.027.0286.3225.01350.02700.0
HEB 700700.0300.017.032.027.0306.4241.01446.02892.0
HEB 800800.0300.017.533.030.0334.2262.01572.03144.0
HEB 900900.0300.018.535.030.0371.3291.01746.03492.0
HEB 10001000.0300.019.036.030.0400.0314.01884.03768.0

Worked example

  1. HEB 200, 4 lengths of 6 m: 78.1 cm² × 0,785 = 61.3 kg/m; × 6 m × 4 = 1471.2 kg.

What is an HEB beam?

HEB is the European wide-flange H section, dimensioned in EN 10365 (formerly DIN 1025-2). Up to size 300 an HEB is as deep as it is wide: HEB 200 is 200 × 200 mm. It is used for columns, heavy beams, crane rails and machine bases.

Unit weight and cross-section

For hot-rolled sections the unit weight is area × 7.85 ÷ 10 (area in cm², result in kg/m). For HEB 200: 78.1 cm² × 0.785 = 61.31 kg/m, matching the catalogue’s 61.3 kg/m. The area adds up web, flanges and root fillets, which is why section weight comes from the tabulated area rather than a simple rectangle formula.

HEB versus HEA

At the same nominal size HEB is clearly heavier than HEA: at 200, HEA is 42.3 kg/m and HEB 61.3 kg/m; at 300, HEA is 88.3 kg/m and HEB 117.0 kg/m. The difference comes from thicker flanges and web; the choice follows the structural calculation.

Frequently asked questions

How much does HEB 200 weigh per metre?

HEB 200 weighs 61.3 kg/m, so a 6 m length is 367.8 kg and a 12 m length 735.6 kg. Its area is 78.1 cm².

How much does HEB 120 weigh per metre?

HEB 120 weighs 26.7 kg/m, so a 6 m length is 160.2 kg and a 12 m length 320.4 kg. Its area is 34.0 cm².

How much does HEB 160 weigh per metre?

HEB 160 weighs 42.6 kg/m, so a 6 m length is 255.6 kg and a 12 m length 511.2 kg. Its area is 54.3 cm².

How much does HEB 300 weigh per metre?

HEB 300 weighs 117.0 kg/m, so a 6 m length is 702.0 kg and a 12 m length 1404.0 kg. Its area is 149.1 cm².

How do I read the HEB beam weight chart?

Each row is one section size. h is the height, b the flange width, tw the web and tf the flange thickness, r the root radius (mm) and A the area (cm²). The kg/m column is the carbon steel weight per metre; the 6 m and 12 m columns give the weight of one length.

How is stainless HEB beam weight calculated?

Multiply the carbon steel value by the density ratio: × 7.90 / 7.85 for 304 (about 0.6% more) and × 8.00 / 7.85 for 316L (about 1.9% more). The material option in the calculator does this for you.

How do I calculate HEB price from weight?

Find the piece weight first, then multiply by the unit price: piece weight × price per kg, or length (m) × price per metre. If you have a price per tonne, divide it by 1000 to get the price per kg. Enter the price in the calculator’s optional “Unit price” field and choose its unit to see the amount per piece and in total next to the weight; leave it empty to calculate weight only.