PRECISION IN MATERIAL. CLARITY IN SUPPLY.

WEIGHT CALCULATOR

Square bar weight and price calculator

Calculate solid square bar weight from side length, length and quantity. A kg/m chart for 304, 316L and 6082 follows below.

Material selection

Representative material density8 g/cm³

A general estimate for this material. Selecting a grade can provide a more specific density.

Custom density

Dimensions and quantity

Other

Leave empty to calculate weight only. The price is used for this calculation alone; no currency conversion is applied. Request a current price

All dimensions are in millimetres. Decimal points and commas are accepted.

How is the weight calculated?

The section area is multiplied by density to find kg/m. Piece weight uses the entered length; total weight also includes quantity.

a² = section area (mm²)
Area × density / 1000 = kg/m
kg/m × length (mm) / 1000 × quantity = total kg
APPROXIMATE WEIGHTSquare

Stainless steels

Total weight
12.8kg
Weight per metre
12.8 kg/m
Weight per piece
12.8 kg
Density used
8 g/cm³

A theoretical estimate. Actual dimensions, tolerances and material properties can change the measured weight.

Calculate tolerance for these dimensionsEnquire about these dimensions

Square bar weight chart

Theoretical weight from nominal dimensions and the typical densities used by the calculator (g/cm³ in brackets). Actual weight varies with size tolerance and grade; use these values for estimates, not for invoicing.

Square bar weight chartCarbon steel · 304 / 304L · 316L · Aluminium 6082 · kg/m · 8–100 mm
Side (mm)Carbon steel (7.85)304 / 304L (7.90)316L (8.00)Aluminium 6082 (2.70)
8 × 80.5020.5060.5120.173
10 × 100.7850.7900.8000.270
12 × 121.1301.1381.1520.389
15 × 151.7661.7781.8000.608
20 × 203.1403.1603.2001.080
25 × 254.9064.9385.0001.688
30 × 307.0657.1107.2002.430
40 × 4012.5612.6412.804.320
50 × 5019.6319.7520.006.750
60 × 6028.2628.4428.809.720
80 × 8050.2450.5651.2017.28
100 × 10078.5079.0080.0027.00

Worked example

  1. 40 × 40 mm 304 square bar, 6 m: 1600 mm² × 7.90 ÷ 1000 = 12.64 kg/m; × 6 m = 75.84 kg.

Square bar weight formula

A square bar’s cross-section is side². A 40 × 40 mm carbon steel square bar weighs 1600 mm² × 7.85 ÷ 1000 = 12.56 kg/m. It is 27% heavier than a round bar of the same size, because the round section is the circle that fits inside the square.

Rounded corners and actual weight

Hot-rolled and cold-drawn square bars do not have perfectly sharp corners. On small sections the corner radius can reduce the area by a few per cent, so the theoretical chart value may be slightly higher than a weighed bar. Square bar and box section are different products: box section is hollow and has its own page.

Square bar weight formula in Excel

Side (mm) in A2, length (mm) in B2, density (g/cm³) in C2:

=A2^2*C2/1000*B2/1000

Square bar weight by material

For a 40 × 40 mm section the weights per metre are: carbon steel 12.56 kg/m, 304 stainless 12.64 kg/m, 316L 12.80 kg/m, 2205 duplex 12.48 kg/m, 6082 aluminium 4.32 kg/m, Grade 2 titanium 7.22 kg/m.

Square bar or flat bar?

Square and flat bar of equal area weigh the same: 40 × 40 mm square (12.56 kg/m) equals 80 × 20 mm flat (12.56 kg/m). The part’s shape, not weight, decides: square suits blocks, slides and square pins, flat bar suits plates and brackets with less machining.

From weight to length: square bar

To find how many metres you have, divide the total weight by the weight per metre. 30 × 30 mm carbon steel square weighs 7.07 kg/m, so 100 kg is about 14.2 metres and one tonne about 142 metres. This is how stock is estimated by weighing instead of counting lengths; size tolerance can shift the result by a few per cent.

Frequently asked questions

How much does a 40 × 40 square bar weigh?

12.64 kg/m in 304 stainless, so a 6 m length is 75.84 kg. The area is 40 × 40 = 1600 mm².

How is square bar weight calculated?

kg/m = side² × density (g/cm³) ÷ 1000. Bars with rounded corners weigh slightly less in practice.

How is carbon steel square bar weight calculated?

side² × 7.85 ÷ 1000. A 20 × 20 mm carbon steel square is 3.14 kg/m and 30 × 30 mm 7.07 kg/m.

Do square bar and box section weigh the same?

No. Square bar is solid and box section hollow: a 40 × 40 mm carbon steel bar is 12.56 kg/m, a 40 × 40 × 2 mm box section 2.31 kg/m.

How do I read the square bar weight chart?

Rows are sizes and columns are materials; the number in brackets in each column heading is the density used (g/cm³). Each cell is the weight of one metre (kg/m). Multiply it by the length in metres for one piece and by the quantity for the total.

How much does aluminium square bar weigh?

A 40 × 40 mm 6082 aluminium square bar weighs 4.32 kg/m.

How do I calculate square bar price from weight?

Find the piece weight first, then multiply by the unit price: piece weight × price per kg, or length (m) × price per metre. Enter the price in the calculator’s optional “Unit price” field and choose its unit to see the amount per piece and in total next to the weight; leave it empty to calculate weight only.