PRECISION IN MATERIAL. CLARITY IN SUPPLY.

WEIGHT CALCULATOR

IPN (I beam) weight chart

Choose a taper-flange IPN beam and enter length and quantity to get its weight. Dimensions and a kg/m chart for IPN 80–600 follow below.

Material selection

Representative material density7.85 g/cm³

A general estimate for this material. Selecting a grade can provide a more specific density.

Custom density

Dimensions and quantity

Other: IPN

Leave empty to calculate weight only. The price is used for this calculation alone; no currency conversion is applied. Request a current price

IPN 200: h 200 · b 90 · tw 7.5 · tf 11.3 · r 7.5 mm · A 33.4 cm²

How is the weight calculated?

The section area is multiplied by density to find kg/m. Piece weight uses the entered length; total weight also includes quantity.

catalogue mass (kg/m, carbon steel 7.85 g/cm³) × density ÷ 7.85 = kg/m
kg/m × length (mm) / 1000 × quantity = total kg
APPROXIMATE WEIGHTIPN 200

Carbon / structural steel

Total weight
157.2kg
Weight per metre
26.2 kg/m
Weight per piece
157.2 kg
Density used
7.85 g/cm³

A theoretical estimate. Actual dimensions, tolerances and material properties can change the measured weight.

Rolling tolerances of this sectionEnquire about these dimensions

IPN beam weight chart

Dimensions and carbon steel mass from the producer’s catalogue (EN 10365 dimensions; IPN DIN 1025-1, UPN DIN 1026-1). Actual bars vary within the rolling tolerances.

IPN weight chart and dimensionsIPN 80–600 · carbon steel · h, b, tw, tf, r in mm · A cm² · kg/m, 6 m, 12 m
SectionhbtwtfrA (cm²)kg/m6 m (kg)12 m (kg)
IPN 8080.042.03.95.93.97.65.935.470.8
IPN 100100.050.04.56.84.510.68.349.899.6
IPN 120120.058.05.17.75.114.211.166.6133.2
IPN 140140.066.05.78.65.718.214.385.8171.6
IPN 160160.074.06.39.56.322.817.9107.4214.8
IPN 180180.082.06.910.46.927.921.9131.4262.8
IPN 200200.090.07.511.37.533.426.2157.2314.4
IPN 220220.098.08.112.28.139.531.1186.6373.2
IPN 240240.0106.08.713.18.746.136.2217.2434.4
IPN 260260.0113.09.414.19.453.341.9251.4502.8
IPN 280280.0119.010.115.210.161.047.9287.4574.8
IPN 300300.0125.010.816.210.869.054.2325.2650.4
IPN 320320.0131.011.517.311.577.761.0366.0732.0
IPN 340340.0137.012.218.312.286.768.0408.0816.0
IPN 360360.0143.013.019.513.097.076.1456.6913.2
IPN 380380.0149.013.720.513.7107.084.0504.01008.0
IPN 400400.0155.014.421.614.4117.792.4554.41108.8
IPN 450450.0170.016.224.316.2146.9115.0690.01380.0
IPN 500500.0185.018.027.018.0179.4141.0846.01692.0
IPN 550550.0200.019.030.019.0212.0166.0996.01992.0
IPN 600600.0215.021.632.421.6253.7199.01194.02388.0

Worked example

  1. IPN 200, 4 lengths of 6 m: 33.4 cm² × 0,785 = 26.2 kg/m; × 6 m × 4 = 628.8 kg.

What is an IPN beam?

IPN (called NPI in Turkey) is the I beam to DIN 1025-1, with narrow, sloping-face flanges. Parallel-flange IPE beams have replaced it in many uses, but it is still used for crane runways, rail systems and repairs to existing structures.

Unit weight and cross-section

For hot-rolled sections the unit weight is area × 7.85 ÷ 10 (area in cm², result in kg/m). For IPN 200: 33.4 cm² × 0.785 = 26.22 kg/m, matching the catalogue’s 26.2 kg/m. The area adds up web, flanges and root fillets, which is why section weight comes from the tabulated area rather than a simple rectangle formula.

IPN versus IPE

At the same height IPN is usually heavier than IPE: IPN 200 is 26.2 kg/m and IPE 200 22.4 kg/m. IPN flanges are tapered, so bolted joints need taper washers; IPE’s parallel flanges make joints simpler.

Frequently asked questions

How much does IPN 100 weigh per metre?

IPN 100 weighs 8.3 kg/m, so a 6 m length is 49.8 kg and a 12 m length 99.6 kg. Its area is 10.6 cm².

How much does IPN 120 weigh per metre?

IPN 120 weighs 11.1 kg/m, so a 6 m length is 66.6 kg and a 12 m length 133.2 kg. Its area is 14.2 cm².

How much does IPN 200 weigh per metre?

IPN 200 weighs 26.2 kg/m, so a 6 m length is 157.2 kg and a 12 m length 314.4 kg. Its area is 33.4 cm².

How do I read the IPN beam weight chart?

Each row is one section size. h is the height, b the flange width, tw the web and tf the flange thickness, r the root radius (mm) and A the area (cm²). The kg/m column is the carbon steel weight per metre; the 6 m and 12 m columns give the weight of one length.

How is stainless IPN beam weight calculated?

Multiply the carbon steel value by the density ratio: × 7.90 / 7.85 for 304 (about 0.6% more) and × 8.00 / 7.85 for 316L (about 1.9% more). The material option in the calculator does this for you.

Is IPN the same as an I beam?

In Europe, IPN is the taper-flange I beam to DIN 1025-1 (called NPI or I profile in Turkey). The parallel-flange European I beam is IPE.

How do I calculate IPN price from weight?

Find the piece weight first, then multiply by the unit price: piece weight × price per kg, or length (m) × price per metre. If you have a price per tonne, divide it by 1000 to get the price per kg. Enter the price in the calculator’s optional “Unit price” field and choose its unit to see the amount per piece and in total next to the weight; leave it empty to calculate weight only.