PRECISION IN MATERIAL. CLARITY IN SUPPLY.

WEIGHT CALCULATOR

Rebar weight calculator

Enter the rebar diameter, length and quantity to get the weight from nominal mass. A chart of kg/m, 12 m bar weight and metres per tonne for Ø6–Ø40 follows.

Material selection

Representative material density7.85 g/cm³

A general estimate for this material. Selecting a grade can provide a more specific density.

Custom density

Dimensions and quantity

Other: Rebar

Leave empty to calculate weight only. The price is used for this calculation alone; no currency conversion is applied. Request a current price

Nominal mass to EN 10080 / TS 708.

How is the weight calculated?

The section area is multiplied by density to find kg/m. Piece weight uses the entered length; total weight also includes quantity.

catalogue mass (kg/m, carbon steel 7.85 g/cm³) × density ÷ 7.85 = kg/m
kg/m × length (mm) / 1000 × quantity = total kg
APPROXIMATE WEIGHTØ12

Carbon / structural steel

Total weight
10.654kg
Weight per metre
0.888 kg/m
Weight per piece
10.654 kg
Density used
7.85 g/cm³

A theoretical estimate. Actual dimensions, tolerances and material properties can change the measured weight.

Enquire about these dimensions

Rebar weight chart

Nominal mass to EN 10080 / TS 708, calculated from the nominal diameter with 7.85 g/cm³. Each bar may deviate slightly within the standard’s tolerance.

Rebar weight chartØ6–Ø40 · nominal mass to EN 10080 / TS 708 · kg/m, 12 m bar, metres per tonne
Diameterkg/m12 m bar (kg)Metres per tonne12 m bars per tonne
Ø60.2222.664505375.5
Ø80.3954.742534211.2
Ø100.6177.401622135.2
Ø120.88810.65112693.9
Ø141.20814.5082869.0
Ø161.57818.9463452.8
Ø181.99823.9750141.7
Ø202.46629.5940533.8
Ø222.98435.8133527.9
Ø253.85346.2426021.6
Ø284.83458.0020717.2
Ø326.31375.7615813.2
Ø367.99095.8812510.4
Ø409.865118.381018.4

Worked example

  1. 40 bars of Ø12 rebar, 12 m each: 12² × 0,00617 = 0.888 kg/m; × 12 m = 10.65 kg; × 40 = 426.2 kg.

Rebar weight formula

Rebar weight per metre is calculated from the nominal diameter: kg/m = π × d² ÷ 4 × 7.85 ÷ 1000, or d² × 0.00617. For Ø12 that is 144 × 0.00617 = 0.888 kg/m. Ribs are included in this nominal mass; EN 10080 and TS 708 define nominal mass this way and allow a small deviation for actual bars.

12 m bars and tonnes

Rebar is usually sold in 12 m lengths. A 12 m Ø12 bar weighs 10.65 kg and Ø16 18.94 kg. For rebar bought by the tonne, metres = 1000 ÷ kg/m: one tonne of Ø12 is about 1126 metres, or about 94 bars.

B420C and B500C grades

Common rebar grades in Turkey are B420C and B500C to TS 708; the number is the minimum yield strength (MPa). The grade changes strength, not weight: B420C and B500C bars of the same diameter have the same nominal mass.

Frequently asked questions

How much does Ø12 rebar weigh per metre?

Ø12 rebar has a nominal mass of 0.888 kg/m; a 12 m bar is 10.65 kg.

How much does Ø8 rebar weigh per metre?

0.395 kg/m; a 12 m bar is 4.74 kg.

How many metres are in a tonne of Ø16 rebar?

At 1.578 kg/m, one tonne of Ø16 is about 634 metres, about 53 bars of 12 m.

What is the rebar weight formula?

kg/m = diameter² × 0.00617 (diameter in mm). Total = kg/m × length (m) × quantity.

What is rebar unit weight?

The nominal weight of one metre of bar (kg/m). The chart values follow the nominal mass definition of EN 10080 and TS 708.

Do B420C and B500C weigh the same?

Yes. The grade sets the yield strength; bars of the same diameter have the same nominal mass in both grades.

How do I calculate rebar price from weight?

Find the piece weight first, then multiply by the unit price: piece weight × price per kg, or length (m) × price per metre. If you have a price per tonne, divide it by 1000 to get the price per kg. Enter the price in the calculator’s optional “Unit price” field and choose its unit to see the amount per piece and in total next to the weight; leave it empty to calculate weight only.