PRECISION IN MATERIAL. CLARITY IN SUPPLY.

WEIGHT CALCULATOR

Angle weight calculator

Calculate equal and unequal angle weight from leg sizes and thickness. Root and toe radii follow EN 10056-1; an angle weight chart follows below.

Material selection

Representative material density8 g/cm³

A general estimate for this material. Selecting a grade can provide a more specific density.

Custom density

Dimensions and quantity

Other

Leave empty to calculate weight only. The price is used for this calculation alone; no currency conversion is applied. Request a current price

Without a radius, the EN 10056-1 root radius for the leg size is used; the toe radius is half of it.

How is the weight calculated?

The section area is multiplied by density to find kg/m. Piece weight uses the entered length; total weight also includes quantity.

t (a + b − t) + (1 − π/4)(r1² − 2 r2²) = section area (mm²)
Area × density / 1000 = kg/m
kg/m × length (mm) / 1000 × quantity = total kg
APPROXIMATE WEIGHTAngle

Stainless steels

Total weight
3.842kg
Weight per metre
3.842 kg/m
Weight per piece
3.842 kg
Density used
8 g/cm³

A theoretical estimate. Actual dimensions, tolerances and material properties can change the measured weight.

Enquire about these dimensions

Angle weight chart

Theoretical weight from nominal dimensions and the typical densities used by the calculator (g/cm³ in brackets). Actual weight varies with size tolerance and grade; use these values for estimates, not for invoicing.

Angle weight chart (EN 10056-1)Equal and unequal angles · carbon steel · 304 · 316L · kg/m · root radius r1, toe radius r1 / 2
Legs × thickness (mm)r1 (mm)Carbon steel (7.85)304 / 304L (7.90)316L (8.00)
20 × 20 × 33.50.8820.8870.899
25 × 25 × 33.51.1171.1241.139
30 × 30 × 35.01.3631.3721.389
30 × 30 × 45.01.7791.7911.813
40 × 40 × 46.02.4172.4322.463
40 × 40 × 56.02.9742.9933.031
50 × 50 × 57.03.7703.7943.842
50 × 50 × 67.04.4694.4974.554
60 × 60 × 68.05.4235.4585.527
70 × 70 × 79.07.3777.4247.518
80 × 80 × 810.09.6309.6919.814
100 × 100 × 1012.015.0415.1315.32
120 × 120 × 1213.021.6221.7622.03
30 × 20 × 34.01.1201.1271.142
40 × 25 × 44.51.9321.9451.969
60 × 40 × 56.03.7593.7833.831
80 × 40 × 88.07.0887.1337.223
100 × 50 × 67.06.8246.8676.954

Worked example

  1. 50 × 50 × 5 mm 304 angle, 6 m: 5 × (50 + 50 − 5) + (1 − π/4)(7² − 2 × 3,5²) = 480.3 mm²; 3.79 kg/m; × 6 m = 22.76 kg.

Angle weight formula

An angle’s area is t × (a + b − t) + (1 − π/4) × (r1² − 2 × r2²), with a and b the legs, t the thickness, r1 the root radius and r2 the toe radius. The root fillet adds material and the rounded toes remove some. A 50 × 50 × 5 mm angle with r1 = 7 mm weighs 3.77 kg/m in carbon steel, matching the 3.77 kg/m in the EN 10056-1 table.

Equal and unequal angles

Angle sizes are written leg × leg × thickness: 50 × 50 × 5 is an equal angle and 60 × 40 × 5 an unequal angle. In EN 10056-1 the root radius grows with leg size (3.5 mm at 20 mm legs, 12 mm at 100 mm) and the toe radius is half of it. Bent (cold-formed) angles have a constant-thickness bend instead; enter your own bend radius in the root radius field for those.

Angle weight formula in Excel

Leg A in A2, leg B in B2, thickness in C2, root radius r1 in D2, length in E2 (mm), density (g/cm³) in F2; the toe radius is taken as r1 / 2:

=(C2*(A2+B2-C2)+(1-PI()/4)*(D2^2-2*(D2/2)^2))*F2/1000*E2/1000

Angle weight by material

For a 50 × 50 × 5 mm angle the weights per metre are: carbon steel 3.77 kg/m, 304 stainless 3.79 kg/m, 316L 3.84 kg/m, 2205 duplex 3.75 kg/m, 6082 aluminium 1.30 kg/m, Grade 2 titanium 2.17 kg/m. Structural steel tables give carbon steel angle weights; stainless angles are about 0.6–2% heavier, depending on density.

Where angles are used

Angles are among the most used sections in frames, chassis, shelving, railings, stairs and mounting joints. An equal angle behaves similarly in both directions; on an unequal angle the long leg is stiffer in bending. Stainless angles serve supports and joints in food, chemical and marine settings, carbon steel angles general structural work.

From weight to length: angle

To find how many metres you have, divide the total weight by the weight per metre. 50 × 50 × 5 mm carbon steel angle weighs 3.77 kg/m, so 100 kg is about 26.5 metres and one tonne about 265 metres. This is how stock is estimated by weighing instead of counting lengths; size tolerance can shift the result by a few per cent.

Frequently asked questions

How much does a 50 × 50 × 5 stainless angle weigh?

3.79 kg/m in 304 stainless, with the EN 10056-1 root radius of 7 mm and toe radius of 3.5 mm.

How is angle weight calculated?

Area = t × (a + b − t) + (1 − π/4) × (r1² − 2 × r2²), where a and b are the legs, t the thickness, r1 the root and r2 the toe radius. kg/m = area × density ÷ 1000.

How much does carbon steel angle weigh?

To EN 10056-1, carbon steel angle is 2.42 kg/m at 40 × 40 × 4 mm and 3.77 kg/m at 50 × 50 × 5 mm.

How is unequal angle weight calculated?

Enter both legs; the root radius comes from the EN 10056-1 unequal-angle table. A 60 × 40 × 5 mm carbon steel angle is 3.76 kg/m.

How do I read the angle weight chart?

Rows are sizes and columns are materials; the number in brackets in each column heading is the density used (g/cm³). Each cell is the weight of one metre (kg/m). Multiply it by the length in metres for one piece and by the quantity for the total.

How do I calculate angle weight in Excel?

With legs in A2 and B2, thickness in C2, root radius in D2, length in E2 (mm) and density in F2: =(C2*(A2+B2-C2)+(1-PI()/4)*(D2^2-2*(D2/2)^2))*F2/1000*E2/1000.

How do I calculate angle price from weight?

Find the piece weight first, then multiply by the unit price: piece weight × price per kg, or length (m) × price per metre. Enter the price in the calculator’s optional “Unit price” field and choose its unit to see the amount per piece and in total next to the weight; leave it empty to calculate weight only.