ISO 286 TOLERANCES
f7 tolerance chart
ISO 286 values for the f7 shaft tolerance. Enter a diameter to see the limits; a table for every size band follows below.
Dimension and tolerance
Standard
Feature type
Quick entry by tolerance notation
Examples: 20 h9 · 25 H7/g6
Verified table coverage: 0 < size ≤ 3150 mm; class-specific limits apply. Lists change with dimension. A selected class is not a delivery tolerance commitment.
TOLERANCE CALCULATION
Size limits
Diameter
f7- Minimum size
- 24.959 mm
- Maximum size
- 24.98 mm
- Lower deviation
- -41 µm (-0.041 mm)
- Upper deviation
- -20 µm (-0.02 mm)
- Tolerance width
- 21 µm (0.021 mm)
Check a measured size
This check compares numerical size limits only; it does not assess measurement uncertainty or form tolerances.
The result shows size limits for the selected ISO class. Ovality, straightness, surface roughness and temperature effects are outside this calculation.
f7 tolerance chart
Values from ISO 286-2 for every size band up to 3150 mm, in micrometres (µm). Add the deviations to the nominal size; the calculator above gives the limits in millimetres.
f7 tolerance chartupper / lower deviation, µm · IT: tolerance width, µm
| Size (mm) | f7 shaft | IT7 |
|---|---|---|
| 0–3 | −6 / −16 | 10 |
| 3–6 | −10 / −22 | 12 |
| 6–10 | −13 / −28 | 15 |
| 10–18 | −16 / −34 | 18 |
| 18–30 | −20 / −41 | 21 |
| 30–50 | −25 / −50 | 25 |
| 50–80 | −30 / −60 | 30 |
| 80–120 | −36 / −71 | 35 |
| 120–180 | −43 / −83 | 40 |
| 180–250 | −50 / −96 | 46 |
| 250–315 | −56 / −108 | 52 |
| 315–400 | −62 / −119 | 57 |
| 400–500 | −68 / −131 | 63 |
| 500–630 | −76 / −146 | 70 |
| 630–800 | −80 / −160 | 80 |
| 800–1000 | −86 / −176 | 90 |
| 1000–1250 | −98 / −203 | 105 |
| 1250–1600 | −110 / −235 | 125 |
| 1600–2000 | −120 / −270 | 150 |
| 2000–2500 | −130 / −305 | 175 |
| 2500–3150 | −145 / −355 | 210 |
Worked examples
- Ø10 f7 shaft: in the 6–10 mm band f7 is −13 / −28 µm, so the size must lie between 9.972 and 9.987 mm.
- Ø25 f7 shaft: in the 18–30 mm band f7 is −20 / −41 µm, so the size must lie between 24.959 and 24.980 mm.
- Ø50 f7 shaft: in the 30–50 mm band f7 is −25 / −50 µm, so the size must lie between 49.950 and 49.975 mm.
What does f7 mean?
In an ISO 286 code the letter gives the position of the tolerance zone relative to the nominal size and the number its width (grade IT7). Capital letters are for holes, lower case for shafts.
Both deviations of f7 are negative: the shaft is always slightly below the nominal size, which is why it gives a clearance fit with an H hole.
IT7 is usually reached by reaming, precision turning or grinding.
Where is f7 used?
f7 is a clearance-fit shaft tolerance used with H8 or H7 holes (H8/f7, H7/f7) for running shafts in lubricated bearings at moderate speed.
How to read the f7 tolerance chart
First find the row containing the nominal size: “10–18” covers sizes above 10 mm up to and including 18 mm. Add the upper and lower deviations of that row, in micrometres, to the nominal size; 1000 µm = 1 mm.
The tolerance width is the difference between the upper and lower deviation and equals IT7. Classes ending in the same number (for example H7, h7, js7) share this width; the letter only moves the zone.
Frequently asked questions
What is the f7 tolerance value?
f7: 10–18 mm: −16 / −34 µm; 18–30 mm: −20 / −41 µm; 30–50 mm: −25 / −50 µm. The value grows with size; other bands are in the table.
What are the limits of Ø20 f7?
f7: 19.959 – 19.980 mm (−20 / −41 µm).
Where is f7 used?
f7 is a clearance-fit shaft tolerance used with H8 or H7 holes (H8/f7, H7/f7) for running shafts in lubricated bearings at moderate speed.
What does IT7 mean?
IT7 is the ISO 286 tolerance grade and sets the width of the tolerance; it grows with size. At Ø25 mm IT7 = 21 µm. IT7 is usually reached by reaming, precision turning or grinding.
How do I calculate a f7 tolerance?
Find the band containing the nominal size and add the upper / lower deviation (µm) to it. Example: Ø20 f7: 20 −20 µm = 19.980 mm and 20 −41 µm = 19.959 mm. The calculator does this for you.