PRECISION IN MATERIAL. CLARITY IN SUPPLY.

ISO 286 TOLERANCES

p6 tolerance chart

ISO 286 values for the p6 shaft tolerance. Enter a diameter to see the limits; a table for every size band follows below.

Dimension and tolerance

Standard

Feature type

Tolerance class
ISO p6
Quick entry by tolerance notation

Examples: 20 h9 · 25 H7/g6

Verified table coverage: 0 < size ≤ 3150 mm; class-specific limits apply. Lists change with dimension. A selected class is not a delivery tolerance commitment.

TOLERANCE CALCULATION

Size limits

25 p6 p6: 25.022 – 25.035 mm (+22 / +35 µm)

Diameter

p6
Minimum size
25.022 mm
Maximum size
25.035 mm
Lower deviation
+22 µm (+0.022 mm)
Upper deviation
+35 µm (+0.035 mm)
Tolerance width
13 µm (0.013 mm)
Check a measured size

This check compares numerical size limits only; it does not assess measurement uncertainty or form tolerances.

Tolerance zone µm
Nominal · 0p62235

Calculate weight from nominal dimensions

The result shows size limits for the selected ISO class. Ovality, straightness, surface roughness and temperature effects are outside this calculation.

p6 tolerance chart

Values from ISO 286-2 for every size band up to 3150 mm, in micrometres (µm). Add the deviations to the nominal size; the calculator above gives the limits in millimetres.

p6 tolerance chartupper / lower deviation, µm · IT: tolerance width, µm
Size (mm)p6 shaftIT6
0–3+12 / +66
3–6+20 / +128
6–10+24 / +159
10–18+29 / +1811
18–30+35 / +2213
30–50+42 / +2616
50–80+51 / +3219
80–120+59 / +3722
120–180+68 / +4325
180–250+79 / +5029
250–315+88 / +5632
315–400+98 / +6236
400–500+108 / +6840
500–630+122 / +7844
630–800+138 / +8850
800–1000+156 / +10056
1000–1250+186 / +12066
1250–1600+218 / +14078
1600–2000+262 / +17092
2000–2500+305 / +195110
2500–3150+375 / +240135

Worked examples

  1. Ø10 p6 shaft: in the 6–10 mm band p6 is +24 / +15 µm, so the size must lie between 10.015 and 10.024 mm.
  2. Ø25 p6 shaft: in the 18–30 mm band p6 is +35 / +22 µm, so the size must lie between 25.022 and 25.035 mm.
  3. Ø50 p6 shaft: in the 30–50 mm band p6 is +42 / +26 µm, so the size must lie between 50.026 and 50.042 mm.

What does p6 mean?

In an ISO 286 code the letter gives the position of the tolerance zone relative to the nominal size and the number its width (grade IT6). Capital letters are for holes, lower case for shafts.

Both deviations of p6 are positive: the shaft is always slightly above the nominal size, which is why it gives a transition or interference fit with an H hole.

IT6 is usually reached by grinding or precision turning.

Where is p6 used?

p6 is the shaft tolerance giving the H7/p6 interference fit, used where bushes and hubs are pressed on and not meant to be removed.

How to read the p6 tolerance chart

First find the row containing the nominal size: “10–18” covers sizes above 10 mm up to and including 18 mm. Add the upper and lower deviations of that row, in micrometres, to the nominal size; 1000 µm = 1 mm.

The tolerance width is the difference between the upper and lower deviation and equals IT6. Classes ending in the same number (for example H6, h6, js6) share this width; the letter only moves the zone.

Frequently asked questions

What is the p6 tolerance value?

p6: 10–18 mm: +29 / +18 µm; 18–30 mm: +35 / +22 µm; 30–50 mm: +42 / +26 µm. The value grows with size; other bands are in the table.

What are the limits of Ø20 p6?

p6: 20.022 – 20.035 mm (+35 / +22 µm).

Where is p6 used?

p6 is the shaft tolerance giving the H7/p6 interference fit, used where bushes and hubs are pressed on and not meant to be removed.

What does IT6 mean?

IT6 is the ISO 286 tolerance grade and sets the width of the tolerance; it grows with size. At Ø25 mm IT6 = 13 µm. IT6 is usually reached by grinding or precision turning.

How do I calculate a p6 tolerance?

Find the band containing the nominal size and add the upper / lower deviation (µm) to it. Example: Ø20 p6: 20 +35 µm = 20.035 mm and 20 +22 µm = 20.022 mm. The calculator does this for you.