PRECISION IN MATERIAL. CLARITY IN SUPPLY.

ISO 286 TOLERANCES

g6 tolerance chart

ISO 286 values for the g6 shaft tolerance. Enter a diameter to see the limits; a table for every size band follows below.

Dimension and tolerance

Standard

Feature type

Tolerance class
ISO g6
Quick entry by tolerance notation

Examples: 20 h9 · 25 H7/g6

Verified table coverage: 0 < size ≤ 3150 mm; class-specific limits apply. Lists change with dimension. A selected class is not a delivery tolerance commitment.

TOLERANCE CALCULATION

Size limits

25 g6 g6: 24.98 – 24.993 mm (-20 / -7 µm)

Diameter

g6
Minimum size
24.98 mm
Maximum size
24.993 mm
Lower deviation
-20 µm (-0.02 mm)
Upper deviation
-7 µm (-0.007 mm)
Tolerance width
13 µm (0.013 mm)
Check a measured size

This check compares numerical size limits only; it does not assess measurement uncertainty or form tolerances.

Tolerance zone µm
Nominal · 0g6-20-7

Calculate weight from nominal dimensions

The result shows size limits for the selected ISO class. Ovality, straightness, surface roughness and temperature effects are outside this calculation.

g6 tolerance chart

Values from ISO 286-2 for every size band up to 3150 mm, in micrometres (µm). Add the deviations to the nominal size; the calculator above gives the limits in millimetres.

g6 tolerance chartupper / lower deviation, µm · IT: tolerance width, µm
Size (mm)g6 shaftIT6
0–3−2 / −86
3–6−4 / −128
6–10−5 / −149
10–18−6 / −1711
18–30−7 / −2013
30–50−9 / −2516
50–80−10 / −2919
80–120−12 / −3422
120–180−14 / −3925
180–250−15 / −4429
250–315−17 / −4932
315–400−18 / −5436
400–500−20 / −6040
500–630−22 / −6644
630–800−24 / −7450
800–1000−26 / −8256
1000–1250−28 / −9466
1250–1600−30 / −10878
1600–2000−32 / −12492
2000–2500−34 / −144110
2500–3150−38 / −173135

Worked examples

  1. Ø10 g6 shaft: in the 6–10 mm band g6 is −5 / −14 µm, so the size must lie between 9.986 and 9.995 mm.
  2. Ø25 g6 shaft: in the 18–30 mm band g6 is −7 / −20 µm, so the size must lie between 24.980 and 24.993 mm.
  3. Ø50 g6 shaft: in the 30–50 mm band g6 is −9 / −25 µm, so the size must lie between 49.975 and 49.991 mm.

What does g6 mean?

In an ISO 286 code the letter gives the position of the tolerance zone relative to the nominal size and the number its width (grade IT6). Capital letters are for holes, lower case for shafts.

Both deviations of g6 are negative: the shaft is always slightly below the nominal size, which is why it gives a clearance fit with an H hole.

IT6 is usually reached by grinding or precision turning.

Where is g6 used?

g6 is the shaft tolerance that forms the H7/g6 sliding fit with an H7 hole: for moving parts with small clearance, guides and accurate location.

How to read the g6 tolerance chart

First find the row containing the nominal size: “10–18” covers sizes above 10 mm up to and including 18 mm. Add the upper and lower deviations of that row, in micrometres, to the nominal size; 1000 µm = 1 mm.

The tolerance width is the difference between the upper and lower deviation and equals IT6. Classes ending in the same number (for example H6, h6, js6) share this width; the letter only moves the zone.

Frequently asked questions

What is the g6 tolerance value?

g6: 10–18 mm: −6 / −17 µm; 18–30 mm: −7 / −20 µm; 30–50 mm: −9 / −25 µm. The value grows with size; other bands are in the table.

What are the limits of Ø20 g6?

g6: 19.980 – 19.993 mm (−7 / −20 µm).

Where is g6 used?

g6 is the shaft tolerance that forms the H7/g6 sliding fit with an H7 hole: for moving parts with small clearance, guides and accurate location.

What does IT6 mean?

IT6 is the ISO 286 tolerance grade and sets the width of the tolerance; it grows with size. At Ø25 mm IT6 = 13 µm. IT6 is usually reached by grinding or precision turning.

How do I calculate a g6 tolerance?

Find the band containing the nominal size and add the upper / lower deviation (µm) to it. Example: Ø20 g6: 20 −7 µm = 19.993 mm and 20 −20 µm = 19.980 mm. The calculator does this for you.