GENERAL TOLERANCES
ISO 2768 general tolerance table
ISO 2768 general tolerances for dimensions without an individual tolerance on the drawing. Choose the size and class to see what a callout like “ISO 2768-mK” allows.
General tolerance
Dimension type
General tolerances for dimensions without an individual tolerance on the drawing. In “ISO 2768-mK”, m is the class for linear and angular sizes and K the class for geometric tolerances. ISO 2768-2 has been replaced by ISO 22081:2021; H/K/L classes still appear on older drawings.
ISO 2768-mK
Permitted deviation
Linear dimension
± 0.3 mm- Minimum size
- 49.7 mm
- Maximum size
- 50.3 mm
ISO 2768-2, class K, for 50 mm
- Straightness / flatness
- 0.2 mm
- Perpendicularity (shorter side)
- 0.4 mm
- Symmetry
- 0.6 mm
- Circular run-out
- 0.2 mm
ISO 2768 general tolerance table
Values of ISO 2768-1:1989 and ISO 2768-2:1989. Ranges run from above the previous limit up to and including the limit shown.
ISO 2768-1 linear dimensions± mm; — not specified
| Nominal size (mm) | f · fine | m · medium | c · coarse | v · very coarse |
|---|---|---|---|---|
| 0.5 – 3 | ± 0.05 | ± 0.1 | ± 0.2 | — |
| > 3 – 6 | ± 0.05 | ± 0.1 | ± 0.3 | ± 0.5 |
| > 6 – 30 | ± 0.1 | ± 0.2 | ± 0.5 | ± 1 |
| > 30 – 120 | ± 0.15 | ± 0.3 | ± 0.8 | ± 1.5 |
| > 120 – 400 | ± 0.2 | ± 0.5 | ± 1.2 | ± 2.5 |
| > 400 – 1000 | ± 0.3 | ± 0.8 | ± 2 | ± 4 |
| > 1000 – 2000 | ± 0.5 | ± 1.2 | ± 3 | ± 6 |
| > 2000 – 4000 | — | ± 2 | ± 4 | ± 8 |
ISO 2768-1 external radii and chamfer heights± mm
| Nominal size (mm) | f · m | c · v |
|---|---|---|
| 0.5 – 3 | ± 0.2 | ± 0.4 |
| > 3 – 6 | ± 0.5 | ± 1 |
| > 6 | ± 1 | ± 2 |
ISO 2768-1 angular dimensionsby length of the shorter side
| Shorter side (mm) | f · m | c | v |
|---|---|---|---|
| ≤ 10 | ±1° | ±1°30′ | ±3° |
| > 10 – 50 | ±0°30′ | ±1° | ±2° |
| > 50 – 120 | ±0°20′ | ±0°30′ | ±1° |
| > 120 – 400 | ±0°10′ | ±0°15′ | ±0°30′ |
| > 400 | ±0°5′ | ±0°10′ | ±0°20′ |
ISO 2768-2 straightness and flatnessmm
| Length (mm) | H | K | L |
|---|---|---|---|
| ≤ 10 | 0.02 | 0.05 | 0.1 |
| > 10 – 30 | 0.05 | 0.1 | 0.2 |
| > 30 – 100 | 0.1 | 0.2 | 0.4 |
| > 100 – 300 | 0.2 | 0.4 | 0.8 |
| > 300 – 1000 | 0.3 | 0.6 | 1.2 |
| > 1000 – 3000 | 0.4 | 0.8 | 1.6 |
ISO 2768-2 perpendicularitymm · length of the shorter side
| Shorter side (mm) | H | K | L |
|---|---|---|---|
| ≤ 100 | 0.2 | 0.4 | 0.6 |
| > 100 – 300 | 0.3 | 0.6 | 1 |
| > 300 – 1000 | 0.4 | 0.8 | 1.5 |
| > 1000 – 3000 | 0.5 | 1 | 2 |
ISO 2768-2 symmetry and circular run-outmm
| Length (mm) | H | K | L |
|---|---|---|---|
| Symmetry ≤ 100 | 0.5 | 0.6 | 0.6 |
| Symmetry > 100 – 300 | 0.5 | 0.6 | 1 |
| Symmetry > 300 – 1000 | 0.5 | 0.8 | 1.5 |
| Symmetry > 1000 – 3000 | 0.5 | 1 | 2 |
| Circular run-out (all lengths) | 0.1 | 0.2 | 0.5 |
Worked examples
- 50 mm, ISO 2768-m: ±0.3 mm in the 30–120 mm band, so 49.7–50.3 mm.
- 150 mm, class f (fine): ±0.2 mm. A 4 mm chamfer or radius in class m: ±0.5 mm.
- An angle with a 30 mm shorter side, class m: ±0°30′. At 150 mm, class K gives 0.4 mm straightness/flatness and 0.6 mm perpendicularity.
What is ISO 2768?
ISO 2768 gives the general tolerances that apply to dimensions without an individual tolerance on a drawing. Part 1 (ISO 2768-1) defines classes f (fine), m (medium), c (coarse) and v (very coarse) for linear sizes, external radii and chamfers and angles; part 2 (ISO 2768-2) defines classes H, K and L for straightness, flatness, perpendicularity, symmetry and run-out.
ISO 2768-2 was replaced by ISO 22081 in 2021, but callouts such as “ISO 2768-mK” remain on many drawings.
What does ISO 2768-mK mean?
The lower-case letter is the ISO 2768-1 class and the capital the ISO 2768-2 class. mK means medium (m) for linear and angular sizes and class K for geometric tolerances. It is the most common combination in machining; precise parts use fH and rough work cL.
How to read the tables
For linear sizes find the band that contains the nominal size; “30–120” covers sizes above 30 up to 120 mm. For angles the band is the length of the shorter side forming the angle. Perpendicularity also uses the shorter side, with the longer side as the datum.
Frequently asked questions
What is the ISO 2768-m tolerance?
In the medium (m) class the linear tolerance is ±0.1 for 0.5–6 mm, ±0.2 for 6–30 mm, ±0.3 for 30–120 mm, ±0.5 for 120–400 mm and ±0.8 for 400–1000 mm.
What does ISO 2768-mK mean?
ISO 2768-1 medium (m) applies to linear and angular sizes and ISO 2768-2 class K to geometric tolerances.
What is the ISO 2768-m tolerance of 50 mm?
50 mm is in the 30–120 mm band; class m gives ±0.3 mm, so 49.7–50.3 mm.
What is the ISO 2768 angle tolerance?
It depends on the shorter side: in classes f and m ±1° up to 10 mm, ±30′ for 10–50 mm, ±20′ for 50–120 mm, ±10′ for 120–400 mm and ±5′ above 400 mm.
Is ISO 2768-2 still valid?
ISO 2768-2 was replaced by ISO 22081 in 2021. H, K and L classes on existing drawings are still read with these tables; new drawings use ISO 22081.