ALLOY STEELS
Quenched and tempered steels: 4140, 42CrMo4 and 4340
Quenched and tempered steels are alloy steels that gain strength and toughness by hardening followed by tempering. Shafts, gears, axles, pins and load-bearing connections are their main uses.
What does quenching and tempering mean?
Quenching and tempering is a heat-treatment sequence of hardening followed by tempering. Quenching cools the heated steel rapidly and forms a hard structure; the medium is not always water. The controlled reheating that follows, tempering, sets ductility and toughness as well as hardness.
Hardness and hardenability differ: hardness is a zone’s resistance to indentation; hardenability is how far hardening reaches into the section. Alloy composition therefore matters in thick parts. Chromium in the name does not make these steels stainless.
4140 and 42CrMo4, 41Cr4 and 25CrMo4
4140 is a chromium-molybdenum alloy steel used where strength and toughness are needed together, in pump shafts, transmission elements and pins. The European 42CrMo4 / 1.7225 is close to 4140 in composition and use, but the two standards’ limits are not all identical.
41Cr4 / 1.7035 is a chromium quenched-and-tempered steel used for drive parts such as crankshafts and axles where less strength than 42CrMo4 is needed. 25CrMo4 / 1.7218 is a low-carbon chromium-molybdenum steel with good weldability; 51CrV4 / 1.8159 serves as both a quenched-and-tempered and a spring steel.
4340 and 300M for heavy sections
4340 is a nickel-chromium-molybdenum steel. Its nickel helps reach the required properties in the interior of large sections, not only at the surface; heavy-duty gears and transmission shafts are examples. 300M contains more silicon and vanadium than 4340 and is used where very high strength is targeted.
Grades in this family
EN, AISI / SAE, UNS and JIS designations of the grades in this family. Designations from different systems do not always imply identical specification requirements.
| Grade / Alloy | EN / W.Nr. | AISI / SAE | UNS | JIS | Grade page |
|---|---|---|---|---|---|
| Quenched and tempered steels8 grades | |||||
| Grade page | |||||
| SAE 4140Chromium-molybdenum · Alloy steel | — | 4140 | — | SCM440 | |
| 41Cr4Chromium alloyed · Quenched and tempered41CrS4 (1.7039) | 1.703541Cr4 | 5140 | — | SCr440 | |
| 25CrMo4Chromium-molybdenum · Weldability25CD4 · BS 708A25 | 1.721825CrMo4 | 4130 | — | — | |
| 50CrV4 / 51CrV4Chromium-vanadium · Spring and QT steel50CrV4 · BS 735A51 | 1.815951CrV4 | 6150 | — | SUP10 | |
| 4340 VAR4340 with a controlled remelting route | — | — | G43400 | — | |
| 4340 Air MeltThrough-section hardenability | — | — | G43400 | — | |
| 4330MVanadium modification · Toughness | — | — | K23080 | — | |
| 300M VARModified 4340 · High strength | — | — | K44220 | — | |
Guides
4140, 4340 and 42CrMo4: the differences
The properties of 4140 and 4340 machinery steels, the role of nickel and how the 42CrMo4 designation relates to these materials.
Read the guide4340 and 300M: hardening, strength and manufacture
4340 and 300M are related steels for highly loaded shafts and connections. The modified composition of 300M offers different properties for higher-strength applications. Distinctions appear in tempering and structural development through the section as well as final hardness.
Read the guideDifferences between strength, hardness, toughness and fatigue
A shaft flexing, bending permanently and carrying repeated loads involve different properties. What do strength, hardness, toughness and fatigue mean, and why do they matter separately in a working part?
Read the guideFrequently asked questions
What is a quenched and tempered steel?
An alloy steel given strength and toughness by hardening and then tempering. 4140 (42CrMo4), 41Cr4 and 4340 are common examples.
What types of quenched and tempered steel are there?
Chromium (41Cr4), chromium-molybdenum (4140 / 42CrMo4, 25CrMo4), chromium-vanadium (51CrV4) and nickel-chromium-molybdenum (4340, 300M) steels are the main types.
Are 4140 and 42CrMo4 the same?
They are close in composition and use and are often listed together, but they belong to different standards and not all chemical limits are identical.
Is quenched and tempered steel stainless?
No. Containing chromium does not make them stainless; what is expected of these steels is load-bearing and mechanical performance.
LET’S CLARIFY YOUR REQUIREMENT
Your next project.
The right starting point.
For European-origin material with an EN 10204 3.1 certificate, talk to our team directly about the supply options for your project.
Request a quote