PRECISION IN MATERIAL. CLARITY IN SUPPLY.

ALLOY STEELS

Case-hardening and nitriding steels

These steels are used for parts with a hardened outer surface and a tough core. 9310 serves as a carburising steel in gears and pinions; Nitriding 135 as a nitriding steel in cams, shafts and bushes.

What is a carburising steel?

Carburising adds carbon to the outer zone of steel at temperature. The hardening and tempering that follow set the final properties of the surface and the core. In a gear, the tooth flank resists wear while the root and body transmit torque; the two tasks call for different properties in one part.

9310 is used in aerospace gears and power-transmission parts. The grade name alone does not set the final properties; surface and core properties depend on the processing the part receives.

Nitriding: nitrogen at the surface

Nitriding adds nitrogen to the steel surface and forms a hard outer layer. Because no water or oil quench is needed at the end, dimensional change can be kept limited, which helps in cams and precision shafts. Nitriding 135 is one of the steels developed for this process.

Carburising steels take up carbon at the surface; nitriding steels take up nitrogen. In both, the surface and the core have separate tasks, but the material and process differ.

Grades in this family

2 grades

EN, AISI / SAE and UNS designations of the grades in this family. Designations from different systems do not always imply identical specification requirements.

Material grades: EN, AISI / SAE, UNS
Grade / AlloyEN / W.Nr.AISI / SAEUNSGrade page
Case-hardening and nitriding steels2 grades
Grade page
SAE 9310Hard case · Tough core——G93106
Nitriding 135MDeveloped for a nitrided case——K24065

Frequently asked questions

What is a case-hardening steel?

A steel whose surface takes up carbon at temperature before hardening and tempering. The surface resists wear while the core stays tough; 9310 is an example.

What is the difference between carburising and nitriding?

Carburising adds carbon to the surface, nitriding adds nitrogen. Since nitriding needs no final quench, dimensional change can be kept more limited.

Where are case-hardening steels used?

In gears, pinions and power-transmission parts, where the surface must resist wear and the core must carry load.

LET’S CLARIFY YOUR REQUIREMENT

Your next project.
The right starting point.

For European-origin material with an EN 10204 3.1 certificate, talk to our team directly about the supply options for your project.

Request a quote