BOLT CIRCLE
Bolt circle calculator: PCD and hole coordinates
Enter the bolt circle diameter, number of holes and start angle to get each hole’s angle and X–Y coordinates and the distance between holes. If you have measured the distance between holes on a part, you can find the PCD as well.
Bolt circle and holes
Direction
Angles are measured from the +X axis, as on CNC drawings. Flange holes usually straddle the axes, i.e. start at 360° / (2 × number of holes): 45° for 4 holes, 22.5° for 8.
X = Xₘ + r·cos θ · Y = Yₘ + r·sin θ
Hole positions
- Angle between holes
- 90°
- Adjacent hole centres
- 88.388 mm
Hole coordinates: Ø125 mm, 4 holes
| Hole | Angle (°) | X (mm) | Y (mm) |
|---|---|---|---|
| 1 | 45 | 44.194 | 44.194 |
| 2 | 135 | -44.194 | 44.194 |
| 3 | 225 | -44.194 | -44.194 |
| 4 | 315 | 44.194 | -44.194 |
What is the pitch circle diameter (PCD)?
The pitch circle diameter is the diameter of the circle through the centres of equally spaced bolt holes; it is also called the bolt circle diameter, and flange standards give it as dimension K. Whether two flanges, couplings, wheels or hubs line up depends on this diameter and the number of holes. Gears and screw threads also have a “pitch diameter”, but those are different quantities: the gear’s depends on the module, the thread’s is the d₂ diameter.
How are bolt hole coordinates calculated?
The angle between holes is 360° / number of holes. On a circle of radius r = PCD / 2 centred at (Xc, Yc), hole i sits at θ = start angle + (i − 1) × 360° / n, with X = Xc + r · cos θ and Y = Yc + r · sin θ. As on CNC drawings, the angle is measured counter-clockwise from the +X axis.
Example: an EN 1092-1 DN50 PN16 flange has K = 125 mm and 4 holes. The holes straddle the axes, so the start angle is 45° and hole 1 sits at X = Y = 44.194 mm.
Distance between holes and dividing a circle
The straight distance between adjacent hole centres (the chord) is c = PCD × sin(180° / n). Dividing a circle into 6 equal parts puts the holes 60° apart and the chord equals the radius; 8 parts are 45° apart and 12 parts 30°. On a Ø100 mm circle with 5 holes, adjacent holes are 58.779 mm apart. This chord is what you set on dividers when marking out.
How to measure a bolt circle
With an even number of holes, the centre distance between opposite holes is the PCD itself; in practice measure from one edge of a hole to the same edge of the opposite hole. With 3 or 5 holes there is no opposite hole: measure between adjacent centres and use PCD = distance / sin(180° / n). The “PCD from a measurement” mode does this.
Bolt circles on flanges
On standard flanges the bolt circle, number of holes and bolt size are fixed by the standard. An ASME B16.5 Class 150 NPS 2 flange has a 4.75″ (120.65 mm) bolt circle with 4 holes, while the EN 1092-1 PN16 flange for the same pipe has 125 mm, so flanges of the two systems do not mate. See the flange dimensions chart for all sizes.
Frequently asked questions
What is a bolt circle diameter?
It is the diameter of the circle through the centres of equally spaced bolt holes (PCD), given as dimension K in flange standards.
How do you calculate the distance between holes on a 4-hole flange?
Adjacent holes = PCD × sin(45°). On a DN50 PN16 flange (K = 125 mm) that is 88.39 mm; opposite holes are one PCD apart.
How many degrees apart are 6 holes?
360° / 6 = 60°. 8 holes are 45° apart and 12 holes 30° apart.
How do you measure the PCD of a 5-hole pattern?
Measure between two adjacent hole centres and divide by sin(36°). For example, 67.18 mm gives PCD = 114.3 mm.
What does 5x114.3 mean on a wheel?
Five wheel bolt holes on a 114.3 mm pitch circle diameter. The same notation applies to flange and coupling hole patterns.
How is the start angle chosen?
From the first hole on the drawing. Flange holes straddle the axes, so the start angle is 360° / (2 × number of holes): 45° for 4 holes, 22.5° for 8.