FLANGE DIMENSIONS
Flange dimensions chart: PN10, PN16, PN40 and ASME
Choose the standard, pressure class and nominal size to see the flange outside diameter, bolt circle, hole diameter and the number and size of bolts. EN 1092-1 and ASME B16.5 flange tables follow below.
Flange selection
The drawing is to scale: the outer circle is D, the dashed circle the bolt circle K. Thickness is for weld neck (type 11) flanges; plate (type 01) and blind flanges differ.
EN 1092-1
DN 50 PN16
- Outside diameter (D)
- 165 mm
- Bolt circle (K)
- 125 mm
- Bolt hole (L)
- 18 mm
- Bolts
- 4 × M16
- Thickness (type 11)
- 18 mm
Flange dimension tables
EN 1092-1 connection dimensions in millimetres with the type 11 (weld neck) thickness, and ASME B16.5 dimensions converted from inches.
PN10 flange dimensions (EN 1092-1)D · K · L · bolts · thickness, mm
| DN | D | K | L | Bolts | Thickness |
|---|---|---|---|---|---|
| DN 15 | 95 | 65 | 14 | 4 × M12 | 16 |
| DN 20 | 105 | 75 | 14 | 4 × M12 | 18 |
| DN 25 | 115 | 85 | 14 | 4 × M12 | 18 |
| DN 32 | 140 | 100 | 18 | 4 × M16 | 18 |
| DN 40 | 150 | 110 | 18 | 4 × M16 | 18 |
| DN 50 | 165 | 125 | 18 | 4 × M16 | 18 |
| DN 65 | 185 | 145 | 18 | 8 / 4 × M16 | 18 |
| DN 80 | 200 | 160 | 18 | 8 × M16 | 20 |
| DN 100 | 220 | 180 | 18 | 8 × M16 | 20 |
| DN 125 | 250 | 210 | 18 | 8 × M16 | 22 |
| DN 150 | 285 | 240 | 22 | 8 × M20 | 22 |
| DN 200 | 340 | 295 | 22 | 8 × M20 | 24 |
| DN 250 | 395 | 350 | 22 | 12 × M20 | 26 |
| DN 300 | 445 | 400 | 22 | 12 × M20 | 26 |
| DN 350 | 505 | 460 | 22 | 16 × M20 | 26 |
| DN 400 | 565 | 515 | 26 | 16 × M24 | 26 |
| DN 450 | 615 | 565 | 26 | 20 × M24 | 28 |
| DN 500 | 670 | 620 | 26 | 20 × M24 | 28 |
| DN 600 | 780 | 725 | 30 | 20 × M27 | 30 |
PN16 flange dimensions (EN 1092-1)D · K · L · bolts · thickness, mm
| DN | D | K | L | Bolts | Thickness |
|---|---|---|---|---|---|
| DN 15 | 95 | 65 | 14 | 4 × M12 | 16 |
| DN 20 | 105 | 75 | 14 | 4 × M12 | 18 |
| DN 25 | 115 | 85 | 14 | 4 × M12 | 18 |
| DN 32 | 140 | 100 | 18 | 4 × M16 | 18 |
| DN 40 | 150 | 110 | 18 | 4 × M16 | 18 |
| DN 50 | 165 | 125 | 18 | 4 × M16 | 18 |
| DN 65 | 185 | 145 | 18 | 8 / 4 × M16 | 18 |
| DN 80 | 200 | 160 | 18 | 8 × M16 | 20 |
| DN 100 | 220 | 180 | 18 | 8 × M16 | 20 |
| DN 125 | 250 | 210 | 18 | 8 × M16 | 22 |
| DN 150 | 285 | 240 | 22 | 8 × M20 | 22 |
| DN 200 | 340 | 295 | 22 | 12 × M20 | 24 |
| DN 250 | 405 | 355 | 26 | 12 × M24 | 26 |
| DN 300 | 460 | 410 | 26 | 12 × M24 | 28 |
| DN 350 | 520 | 470 | 26 | 16 × M24 | 30 |
| DN 400 | 580 | 525 | 30 | 16 × M27 | 32 |
| DN 450 | 640 | 585 | 30 | 20 × M27 | 34 |
| DN 500 | 715 | 650 | 33 | 20 × M30 | 36 |
| DN 600 | 840 | 770 | 36 | 20 × M33 | 40 |
PN25 flange dimensions (EN 1092-1)D · K · L · bolts · thickness, mm
| DN | D | K | L | Bolts | Thickness |
|---|---|---|---|---|---|
| DN 15 | 95 | 65 | 14 | 4 × M12 | 16 |
| DN 20 | 105 | 75 | 14 | 4 × M12 | 18 |
| DN 25 | 115 | 85 | 14 | 4 × M12 | 18 |
| DN 32 | 140 | 100 | 18 | 4 × M16 | 18 |
| DN 40 | 150 | 110 | 18 | 4 × M16 | 18 |
| DN 50 | 165 | 125 | 18 | 4 × M16 | 20 |
| DN 65 | 185 | 145 | 18 | 8 × M16 | 22 |
| DN 80 | 200 | 160 | 18 | 8 × M16 | 24 |
| DN 100 | 235 | 190 | 22 | 8 × M20 | 24 |
| DN 125 | 270 | 220 | 26 | 8 × M24 | 26 |
| DN 150 | 300 | 250 | 26 | 8 × M24 | 28 |
| DN 200 | 360 | 310 | 26 | 12 × M24 | 30 |
| DN 250 | 425 | 370 | 30 | 12 × M27 | 32 |
| DN 300 | 485 | 430 | 30 | 16 × M27 | 34 |
| DN 350 | 555 | 490 | 33 | 16 × M30 | 38 |
| DN 400 | 620 | 550 | 36 | 16 × M33 | 40 |
| DN 450 | 670 | 600 | 36 | 20 × M33 | 46 |
| DN 500 | 730 | 660 | 36 | 20 × M33 | 48 |
| DN 600 | 845 | 770 | 39 | 20 × M36 | 48 |
PN40 flange dimensions (EN 1092-1)D · K · L · bolts · thickness, mm
| DN | D | K | L | Bolts | Thickness |
|---|---|---|---|---|---|
| DN 15 | 95 | 65 | 14 | 4 × M12 | 16 |
| DN 20 | 105 | 75 | 14 | 4 × M12 | 18 |
| DN 25 | 115 | 85 | 14 | 4 × M12 | 18 |
| DN 32 | 140 | 100 | 18 | 4 × M16 | 18 |
| DN 40 | 150 | 110 | 18 | 4 × M16 | 18 |
| DN 50 | 165 | 125 | 18 | 4 × M16 | 20 |
| DN 65 | 185 | 145 | 18 | 8 × M16 | 22 |
| DN 80 | 200 | 160 | 18 | 8 × M16 | 24 |
| DN 100 | 235 | 190 | 22 | 8 × M20 | 24 |
| DN 125 | 270 | 220 | 26 | 8 × M24 | 26 |
| DN 150 | 300 | 250 | 26 | 8 × M24 | 28 |
| DN 200 | 375 | 320 | 30 | 12 × M27 | 34 |
| DN 250 | 450 | 385 | 33 | 12 × M30 | 38 |
| DN 300 | 515 | 450 | 33 | 16 × M30 | 42 |
| DN 350 | 580 | 510 | 36 | 16 × M33 | 46 |
| DN 400 | 660 | 585 | 39 | 16 × M36 | 50 |
| DN 450 | 685 | 610 | 39 | 20 × M36 | 57 |
| DN 500 | 755 | 670 | 42 | 20 × M39 | 57 |
| DN 600 | 890 | 795 | 48 | 20 × M45 | 72 |
Class 150 flange dimensions (ASME B16.5)outside diameter · bolt circle · hole, mm (from inches) · bolts
| NPS | DN | Outside dia. | Bolt circle | Hole | Bolts |
|---|---|---|---|---|---|
| 1/2″ | 15 | 88.9 | 60.3 | 15.7 | 4 × 1/2″ |
| 3/4″ | 20 | 98.4 | 69.9 | 15.7 | 4 × 1/2″ |
| 1″ | 25 | 107.9 | 79.4 | 15.7 | 4 × 1/2″ |
| 1 1/4″ | 32 | 117.5 | 88.9 | 15.7 | 4 × 1/2″ |
| 1 1/2″ | 40 | 127 | 98.4 | 15.7 | 4 × 1/2″ |
| 2″ | 50 | 152.4 | 120.6 | 19 | 4 × 5/8″ |
| 2 1/2″ | 65 | 177.8 | 139.7 | 19 | 4 × 5/8″ |
| 3″ | 80 | 190.5 | 152.4 | 19 | 4 × 5/8″ |
| 3 1/2″ | 90 | 215.9 | 177.8 | 19 | 8 × 5/8″ |
| 4″ | 100 | 228.6 | 190.5 | 19 | 8 × 5/8″ |
| 5″ | 125 | 254 | 215.9 | 22.4 | 8 × 3/4″ |
| 6″ | 150 | 279.4 | 241.3 | 22.4 | 8 × 3/4″ |
| 8″ | 200 | 342.9 | 298.5 | 22.4 | 8 × 3/4″ |
| 10″ | 250 | 406.4 | 362 | 25.4 | 12 × 7/8″ |
| 12″ | 300 | 482.6 | 431.8 | 25.4 | 12 × 7/8″ |
| 14″ | 350 | 533.4 | 476.3 | 28.4 | 12 × 1″ |
| 16″ | 400 | 596.9 | 539.8 | 28.4 | 16 × 1″ |
| 18″ | 450 | 635 | 577.9 | 31.8 | 16 × 1 1/8″ |
| 20″ | 500 | 698.5 | 635 | 31.8 | 20 × 1 1/8″ |
| 24″ | 600 | 812.8 | 749.3 | 35.1 | 20 × 1 1/4″ |
Class 300 flange dimensions (ASME B16.5)outside diameter · bolt circle · hole, mm (from inches) · bolts
| NPS | DN | Outside dia. | Bolt circle | Hole | Bolts |
|---|---|---|---|---|---|
| 1/2″ | 15 | 95.3 | 66.7 | 15.7 | 4 × 1/2″ |
| 3/4″ | 20 | 117.5 | 82.6 | 19 | 4 × 5/8″ |
| 1″ | 25 | 123.8 | 88.9 | 19 | 4 × 5/8″ |
| 1 1/4″ | 32 | 133.4 | 98.4 | 19 | 4 × 5/8″ |
| 1 1/2″ | 40 | 155.6 | 114.3 | 22.4 | 4 × 3/4″ |
| 2″ | 50 | 165.1 | 127 | 19 | 8 × 5/8″ |
| 2 1/2″ | 65 | 190.5 | 149.2 | 22.4 | 8 × 3/4″ |
| 3″ | 80 | 209.5 | 168.3 | 22.4 | 8 × 3/4″ |
| 3 1/2″ | 90 | 228.6 | 184.1 | 22.4 | 8 × 3/4″ |
| 4″ | 100 | 254 | 200 | 22.4 | 8 × 3/4″ |
| 5″ | 125 | 279.4 | 235 | 22.4 | 8 × 3/4″ |
| 6″ | 150 | 317.5 | 269.9 | 22.4 | 12 × 3/4″ |
| 8″ | 200 | 381 | 330.2 | 25.4 | 12 × 7/8″ |
| 10″ | 250 | 444.5 | 387.3 | 28.4 | 16 × 1″ |
| 12″ | 300 | 520.7 | 450.8 | 31.8 | 16 × 1 1/8″ |
| 14″ | 350 | 584.2 | 514.4 | 31.8 | 20 × 1 1/8″ |
| 16″ | 400 | 647.7 | 571.5 | 35.1 | 20 × 1 1/4″ |
| 18″ | 450 | 711.2 | 628.7 | 35.1 | 24 × 1 1/4″ |
| 20″ | 500 | 774.7 | 685.8 | 35.1 | 24 × 1 1/4″ |
| 24″ | 600 | 914.4 | 812.8 | 41.1 | 24 × 1 1/2″ |
How to read flange dimensions
A flange’s connection dimensions are the outside diameter (D), bolt circle diameter (K), bolt hole diameter (L) and the number of bolts. Two flanges only mate if these match. Thickness, hub dimensions and the gasket face vary with the flange type; the thickness in the table is for EN 1092-1 type 11 (weld neck) flanges.
What DN and PN mean
DN (nominal diameter) is the nominal size of the pipe the flange fits; it is a name in millimetres, not the actual bore. PN (nominal pressure) is the pressure class in bar: PN16 is rated for about 16 bar at 20 °C, and the permitted pressure falls with material and temperature. In small sizes PN10 and PN16 flanges share the same dimensions; they differ from DN 200, where PN10 has 8 holes and PN16 has 12.
Do EN 1092-1 and ASME B16.5 flanges mate?
Generally not. ASME B16.5 flanges are dimensioned in inches and rated by Class (150, 300…). A 2″ Class 150 flange has an outside diameter of 152.4 mm and a bolt circle of 120.6 mm; a DN 50 PN16 flange has 165 mm and 125 mm. With different bolt circles and hole counts, the two systems do not bolt together directly.
Where the data comes from
EN 1092-1 dimensions were checked against two independent flange tables, and ASME B16.5 dimensions against two tables and a manufacturer catalogue. DN 65 PN10/PN16 flanges appear with 4 or 8 holes in the sources; check the mating flange before ordering. Millimetre values for ASME flanges are converted from inches.
Frequently asked questions
What are the dimensions of a DN 50 PN16 flange?
Per EN 1092-1, a DN 50 PN16 flange has outside diameter 165 mm, bolt circle 125 mm, 4 holes of 18 mm (M16 bolts).
What are the dimensions of a DN 100 PN16 flange?
A DN 100 PN16 flange has outside diameter 220 mm, bolt circle 180 mm, 8 holes of 18 mm (M16 bolts). A PN10 flange has the same dimensions at this size.
What is the difference between PN10 and PN16 flanges?
Up to DN 150 the connection dimensions are the same. From DN 200 they differ: DN 200 PN10 has outside diameter 340 mm, bolt circle 295 mm, 8 holes of 22 mm (M20 bolts); PN16 has outside diameter 340 mm, bolt circle 295 mm, 12 holes of 22 mm (M20 bolts).
What are the dimensions of a DN 80 PN40 flange?
A DN 80 PN40 flange has outside diameter 200 mm, bolt circle 160 mm, 8 holes of 18 mm (M16 bolts). A PN25 flange has the same dimensions at this size.
How is the bolt circle of a flange measured?
The bolt circle (K) is the diameter of the circle through the centres of the bolt holes. On a flange with an even number of holes, measure between the centres of two opposite holes; measuring from the inner edge of one hole to the outer edge of the opposite hole gives the same result.
Are ANSI and DIN flange dimensions the same?
No. ASME B16.5 (ANSI) flanges are in inches and rated by Class; EN 1092-1 (formerly DIN) flanges are in millimetres and rated by PN. A 2″ Class 150 flange has a 120.6 mm bolt circle, a DN 50 PN16 flange 125 mm.