FASTENERS
Metric bolt, nut and washer sizes
Choose the bolt diameter to see the wrench size, head and nut heights and the matching washer. Sizes where ISO and the old DIN wrench sizes differ are marked.
Bolt diameter
Where ISO and old DIN wrench sizes differ, both are shown. Nut height is the ISO 4032 maximum.
ISO 4017 · 4032 · 7089
M10
Bolt (ISO 4017 / 4014)
- Thread pitch (coarse)
- 1.5 mm
- Wrench size (s)
- 16 mm · DIN 17 mm
- Head height (k)
- 6.4 mm
Nut (ISO 4032)
- Wrench size (s)
- 16 mm · DIN 934 17 mm
- Height (m, max)
- 8.4 mm
Washer (ISO 7089)
- Hole (d₁)
- 10.5 mm
- Outside diameter (d₂)
- 20 mm
- Thickness (h)
- 2 mm
Bolt, nut and washer size table
Wrench sizes for ISO and old DIN hexagon bolts and nuts, ISO 4017 head heights, ISO 4032 nut heights and ISO 7089 washers, in mm.
Metric bolts, nuts and washers M3–M36pitch · wrench ISO / DIN · head k · nut m · washer d₁ × d₂ × h
| Size | Pitch | s ISO | s DIN | k | m | Washer d₁ | d₂ | h |
|---|---|---|---|---|---|---|---|---|
| M3 | 0.5 | 5.5 | 5.5 | 2 | 2.4 | 3.2 | 7 | 0.5 |
| M4 | 0.7 | 7 | 7 | 2.8 | 3.2 | 4.3 | 9 | 0.8 |
| M5 | 0.8 | 8 | 8 | 3.5 | 4.7 | 5.3 | 10 | 1 |
| M6 | 1 | 10 | 10 | 4 | 5.2 | 6.4 | 12 | 1.6 |
| M8 | 1.25 | 13 | 13 | 5.3 | 6.8 | 8.4 | 16 | 1.6 |
| M10 | 1.5 | 16 | 17 | 6.4 | 8.4 | 10.5 | 20 | 2 |
| M12 | 1.75 | 18 | 19 | 7.5 | 10.8 | 13 | 24 | 2.5 |
| M14 | 2 | 21 | 22 | 8.8 | 12.8 | 15 | 28 | 2.5 |
| M16 | 2 | 24 | 24 | 10 | 14.8 | 17 | 30 | 3 |
| M18 | 2.5 | 27 | 27 | 11.5 | 15.8 | 19 | 34 | 3 |
| M20 | 2.5 | 30 | 30 | 12.5 | 18 | 21 | 37 | 3 |
| M22 | 2.5 | 34 | 32 | 14 | 19.4 | 23 | 39 | 3 |
| M24 | 3 | 36 | 36 | 15 | 21.5 | 25 | 44 | 4 |
| M27 | 3 | 41 | 41 | 17 | 23.8 | 28 | 50 | 4 |
| M30 | 3.5 | 46 | 46 | 18.7 | 25.6 | 31 | 56 | 4 |
| M33 | 3.5 | 50 | 50 | 21 | 28.7 | 34 | 60 | 5 |
| M36 | 4 | 55 | 55 | 22.5 | 31 | 37 | 66 | 5 |
ISO and DIN wrench sizes
For hexagon head bolts and nuts, ISO 4017 / ISO 4032 have replaced the old DIN 933 / DIN 934. Most wrench sizes are the same; only M10 (ISO 16, DIN 17 mm), M12 (ISO 18, DIN 19 mm), M14 (ISO 21, DIN 22 mm), M22 (ISO 34, DIN 32 mm) differ. Check the correct wrench size for these sizes in maintenance and spare parts.
How to read a bolt size
M10 × 40 is a metric coarse bolt with a 10 mm nominal diameter and a 40 mm length, measured from under the head. For a fine thread the pitch is added (M10 × 1.25 × 40). The property class is marked on the head: 8.8, 10.9, 12.9 for steel; A2-70, A4-80 for stainless.
Choosing a washer
An ISO 7089 plain washer (formerly DIN 125 A) is the normal series washer with a hole slightly larger than the bolt. For M10 the hole is 10.5 mm, the outside diameter 20 mm and the thickness 2 mm. A washer spreads the load over a larger surface and seats the nut over oversize holes.
Frequently asked questions
What are the dimensions of an M8 nut?
Per ISO 4032, an M8 nut has a 13 mm wrench size and a maximum height of 6.8 mm.
What are the dimensions of an M10 nut?
Per ISO 4032, an M10 nut has a 16 mm wrench size and a maximum height of 8.4 mm; the old DIN 934 nut has 17 mm.
What are the dimensions of an M12 nut?
Per ISO 4032, an M12 nut has a 18 mm wrench size and a maximum height of 10.8 mm; the old DIN 934 nut has 19 mm.
What are the dimensions of an M16 nut?
Per ISO 4032, an M16 nut has a 24 mm wrench size and a maximum height of 14.8 mm.
What size is an M8 washer?
Per ISO 7089, an M8 washer has a 8.4 mm hole, 16 mm outside diameter and 1.6 mm thickness.
What size is an M10 washer?
Per ISO 7089, an M10 washer has a 10.5 mm hole, 20 mm outside diameter and 2 mm thickness.
What size is an M12 washer?
Per ISO 7089, an M12 washer has a 13 mm hole, 24 mm outside diameter and 2.5 mm thickness.
What wrench size fits an M10 bolt?
An ISO 4017 / 4014 bolt takes a 16 mm wrench, an old DIN 933 / 931 bolt 17 mm.