PRECISION IN MATERIAL. CLARITY IN SUPPLY.

THREADS

Metric thread chart and tap drill sizes

Choose the thread system and size to see the pitch, tap drill size and thread diameters. Besides metric coarse and fine threads, UNC, UNF and BSP (G) inch threads are included.

Thread selection

The tap drill is about D − P. Thread diameters are calculated from the ISO 68-1 basic profile, without tolerances.

ISO 261 / 68-1

M8

Pitch (P)
1.25 mm
Tap drill
6.8 mm
Pitch diameter (d₂)
7.188 mm
Nut minor diameter (D₁)
6.647 mm
Bolt minor diameter (d₃)
6.466 mm
M8: Pitch (P) 1.25 mm, Tap drill 6.8 mm, Pitch diameter (d₂) 7.188 mm, Nut minor diameter (D₁) 6.647 mm, Bolt minor diameter (d₃) 6.466 mm

Thread tables

Metric coarse and fine threads with tap drill sizes and basic diameters, UNC/UNF threads per inch and BSP (G) pipe threads.

Metric coarse threads (ISO 261)pitch · tap drill · d₂ · D₁ · d₃, mm
ThreadPitchTap drilld₂D₁d₃
M1.60.351.251.3731.2211.171
M20.41.61.741.5671.509
M2.50.4522.2082.0131.948
M30.52.52.6752.4592.387
M3.50.62.93.112.852.764
M40.73.33.5453.2423.141
M50.84.24.484.1344.019
M6155.354.9174.773
M81.256.87.1886.6476.466
M101.58.59.0268.3768.16
M121.7510.210.86310.1069.853
M1421212.70111.83511.546
M1621414.70113.83513.546
M202.517.518.37617.29416.933
M222.519.520.37619.29418.933
M2432122.05120.75220.319
M2732425.05123.75223.319
M303.526.527.72726.21125.706
M3643233.40231.6731.093
M424.537.539.07737.12936.479
M4854344.75242.58741.866
M565.550.552.42850.04649.252
M6465860.10357.50556.639
Metric fine threads (ISO 261)pitch · tap drill · d₂ · D₁ · d₃, mm
ThreadPitchTap drilld₂D₁d₃
M8 × 1177.356.9176.773
M8 × 0.750.757.257.5137.1887.08
M10 × 1.251.258.759.1888.6478.466
M10 × 1199.358.9178.773
M12 × 1.51.510.511.02610.37610.16
M12 × 1.251.2510.7511.18810.64710.466
M14 × 1.51.512.513.02612.37612.16
M16 × 1.51.514.515.02614.37614.16
M18 × 221616.70115.83515.546
M18 × 1.51.516.517.02616.37616.16
M20 × 221818.70117.83517.546
M20 × 1.51.518.519.02618.37618.16
M22 × 222020.70119.83519.546
M22 × 1.51.520.521.02620.37620.16
M24 × 222222.70121.83521.546
M27 × 222525.70124.83524.546
M30 × 222828.70127.83527.546
M33 × 223131.70130.83530.546
M36 × 333334.05132.75232.319
M39 × 333637.05135.75235.319
M42 × 333940.05138.75238.319
M45 × 334243.05141.75241.319
M48 × 334546.05144.75244.319
M52 × 444849.40247.6747.093
M56 × 445253.40251.6751.093
M60 × 445657.40255.6755.093
M64 × 446061.40259.6759.093
UNC and UNF threadsmajor diameter · threads per inch
SizeMajor dia. (in)Major dia. (mm)UNC TPIUNF TPI
#40.1122.8454048
#60.1383.5053240
#80.1644.1663236
#100.194.8262432
#120.2165.4862428
1/4″0.256.352028
5/16″0.31257.9381824
3/8″0.3759.5251624
7/16″0.437511.1121420
1/2″0.512.71320
9/16″0.562514.2881218
5/8″0.62515.8751118
3/4″0.7519.051016
7/8″0.87522.225914
1″125.4812
1 1/8″1.12528.575712
1 1/4″1.2531.75712
1 1/2″1.538.1612
BSP (G) pipe threads, ISO 228-1threads per inch · pitch · major · minor, mm
SizeTPIPitchMajor dia.Minor dia.
G 1/8″280.9079.7288.566
G 1/4″191.33713.15711.445
G 3/8″191.33716.66214.95
G 1/2″141.81420.95518.631
G 3/4″141.81426.44124.117
G 1″112.30933.24930.291
G 1 1/4″112.30941.9138.952
G 1 1/2″112.30947.80344.845
G 2″112.30959.61456.656
G 2 1/2″112.30975.18472.226
G 3″112.30987.88484.926
G 4″112.309113.03110.072

How to read a metric thread

M8 denotes a metric coarse thread with a nominal diameter of 8 mm; without a pitch the coarse pitch is meant (1.25 mm for M8). For fine threads the pitch is added: M8 × 1 is a fine thread with a 1 mm pitch. The pitch is the distance between two thread crests. A fine thread at the same diameter has more threads, which holds better under vibration; a coarse thread assembles faster and is less sensitive to damage.

How to find the tap drill size

For metric threads the tap drill is approximately the nominal diameter minus the pitch: D − P. For M8, 8 − 1.25 = 6.75; in practice a 6.8 mm drill is used. M10 takes 8.5 mm and M12 10.2 mm. Ductile materials such as stainless steel and forming (roll) taps may need different sizes; check the tap manufacturer’s recommendation.

Thread diameters

The ISO metric thread profile has a 60° flank angle. The pitch diameter is d₂ = d − 0.6495·P, the nut minor diameter D₁ = d − 1.0825·P and the bolt minor diameter d₃ = d − 1.2269·P. For M8, d₂ ≈ 7.188 mm, D₁ ≈ 6.647 mm and d₃ ≈ 6.466 mm. These are basic values; tolerances are added by thread class (6g, 6H).

Inch threads: UNC, UNF and BSP

UNC (coarse) and UNF (fine) are American unified threads written with threads per inch (TPI): 1/4-20 UNC is 1/4 inch in diameter with 20 threads per inch. BSP (G) pipe threads have the 55° Whitworth profile and are used for plumbing connections. A G 1/2 thread has a major diameter of 20.955 mm, not 12.7 mm; for pipe threads the inch value refers to the nominal pipe size.

Frequently asked questions

What drill size for an M6 tap?

For an M6 coarse thread (pitch 1 mm) the tap drill is 5 mm.

What drill size for an M8 tap?

For an M8 coarse thread (pitch 1.25 mm) the tap drill is 6.8 mm.

What drill size for an M10 tap?

For an M10 coarse thread (pitch 1.5 mm) the tap drill is 8.5 mm.

What drill size for an M12 tap?

For an M12 coarse thread (pitch 1.75 mm) the tap drill is 10.2 mm.

What is the fine pitch of M12?

The preferred fine pitches for M12 are 1.5 and 1.25 mm. The tap drill for M12 × 1.5 is 10.5 mm.

How many mm is a 1/2 inch thread?

A 1/2″ BSP (G 1/2) pipe thread has a major diameter of 20.955 mm and 14 threads per inch (pitch 1.814 mm). A 1/2″ UNC bolt thread is 12.7 mm in diameter with 13 threads per inch.