MACHINING
RPM and cutting speed calculator for turning, milling and drilling
Choose the process, enter the diameter and cutting speed, and calculate the spindle speed, feed rate and machining time. If you know the rpm, you can find the cutting speed instead. Take cutting speed and feed values from the tool manufacturer’s catalogue.
Cutting data
Calculate
Use the starting values from the tool manufacturer’s catalogue for cutting speed and feed; they depend on the workpiece and tool materials and the depth of cut.
n = Vc × 1000 / (π × D)
Spindle speed
- Feed rate (Vf)
- 255 mm/min
- Machining time
- —
RPM formula
Spindle speed is n = Vc × 1000 / (π × D), where Vc is the cutting speed (m/min) and D the diameter of the workpiece (turning) or the tool (milling and drilling) in mm. The factor 1000 converts metres to millimetres. Conversely, Vc = π × D × n / 1000.
Example: turning a Ø50 mm bar at Vc = 200 m/min gives n = 200 × 1000 / (π × 50) ≈ 1,273 rpm. With a feed of f = 0.2 mm/rev the feed rate is Vf = n × f ≈ 255 mm/min.
Feed rate in milling
In milling the feed rate is Vf = n × z × fz, where z is the number of teeth (flutes) and fz the feed per tooth (mm/tooth). A Ø10 mm four-flute end mill at Vc = 120 m/min and fz = 0.05 mm/tooth runs at n ≈ 3,820 rpm and Vf ≈ 764 mm/min.
How is the cutting speed chosen?
The cutting speed depends on the workpiece material, the tool material (HSS, carbide, coated carbide), the depth of cut, coolant and machine rigidity. Stainless steel, nickel and titanium alloys are machined at lower speeds than carbon steel; aluminium allows much higher speeds. Because recommended values for the same material differ between manufacturers, the calculator does not use a fixed table; enter the starting value from your tool catalogue.
Constant surface speed on CNC lathes
With constant surface speed (G96) on a CNC lathe, the machine raises the spindle speed as the diameter falls to keep the cutting speed constant. When facing towards the centre the speed therefore rises quickly, and G50 limits the maximum rpm. The calculator shows the rpm at the given diameter.
Frequently asked questions
How do you calculate rpm?
n = Vc × 1000 / (π × D): multiply the cutting speed (m/min) by 1000 and divide by π times the diameter (mm). The result is revolutions per minute.
How do you calculate cutting speed?
Vc = π × D × n / 1000: multiply the diameter (mm) by the rpm and by π, then divide by 1000; the result is the cutting speed in m/min.
What rpm does a Ø20 mm drill need at 25 m/min?
n = 25 × 1000 / (π × 20) ≈ 398 rpm.
How is the feed rate calculated?
In turning and drilling Vf = n × f (f in mm/rev); in milling Vf = n × z × fz (z teeth, fz in mm/tooth). The result is in mm/min.
How is machining time calculated?
Machining time is t = L / Vf: divide the length of cut (mm) by the feed rate (mm/min). The result is in minutes; approach and return times are added separately.