PRECISION IN MATERIAL. CLARITY IN SUPPLY.

CUTTING PLAN

Cut list optimizer for bars, pipes and profiles

Enter the stock length, saw kerf and the pieces to cut to see how many bars you need, the cutting pattern for each bar and the waste. Works for profiles, pipe, round and flat bar and rebar; nothing to install.

Stock and cutting

Stock length

Pieces to cut

You can paste two spreadsheet columns (length, quantity) or a list such as “1250x4, 800x6”. Saw kerf is typically 1.5–3 mm on a band saw and 2–4 mm on a circular saw; enter your own machine’s value.

CUTTING OPTIMISATION

Cutting plan

5 bars × 6 mTotal stock 30 m
Waste
%4
Cut in list order
6 bars
Pieces
29 · 28.79 m
Kerf loss
87 mm
Reusable offcuts
0.79 m
Scrap
0.42 m

The fewest bars possible for this list.

Request a quote with this cut list
Bars: 5 × 6000 mm · Waste: %4

Bar-by-bar cutting plan

  1. 2 bars: 1950 + 1300 + 3 × 880 mmoffcut 95 mm

  2. 1 bar: 2 × 880 + 10 × 420 mmoffcut 4 mm

  3. 1 bar: 1950 + 3 × 1300 mmoffcut 138 mm

  4. 1 bar: 2 × 1950 + 1300 mmoffcut 791 mm · reusable

What is cutting optimisation?

Cutting optimisation finds the cutting plan that produces the required pieces from standard stock lengths (usually 6 or 12 m) with the fewest bars and the least waste. Cut in a random order, every bar ends with a short, unusable remnant; matched well, the same pieces come out of fewer bars. The calculator first places the longest pieces, then tries to fill each bar as fully as possible from the remaining pieces, and shows whichever plan needs fewer bars.

Example: 5 × 1950, 6 × 1300, 8 × 880 and 10 × 420 mm pieces from 6 m bars with a 3 mm kerf need 6 bars when cut in the order listed. With a cutting plan the same pieces come out of 5 bars, with 4% waste. The page works like a free cut list optimizer; there is nothing to install and no account.

How is the waste percentage calculated?

Waste % = (total stock length bought − total length of the pieces) / total stock length × 100. It includes the saw kerf, end trims and the remnants at the end of each bar. Remnants above a chosen length (for example 500 mm) can be used for later jobs, so the calculator splits them into reusable offcuts and scrap.

In the example above, 30 m of stock yields 28.79 m of pieces; kerf loss is 87 mm and the offcuts total 1123 mm.

Saw kerf and end trim

Kerf is the material the saw blade removes as chips with each cut: typically 1.5–3 mm for a band saw, 2–4 mm for a circular cold saw and less for plasma or laser; enter your own machine’s value. End trim is the allowance for squaring a bent, burred or damaged bar end. The calculator removes the end trim once from each bar and does not count a kerf where a piece ends exactly at the end of the bar.

How to prepare a cut list

A cut list is a table of piece lengths and quantities. Copy it from the drawing or from two spreadsheet columns (length, quantity) and paste it into the length field, or type it as “1250x4, 800x6”. Combining identical lengths into one line keeps the list short. For mitre cuts enter the long-edge length; where two mitres share a cut, add the extra loss to the kerf.

From cutting plan to order weight

Once the number of bars is known, the order weight is bars × bar length × weight per metre. A 40 × 40 × 2 mm steel box section weighs about 2.31 kg/m, so a 6 m length weighs about 13.8 kg. Enter the weight per metre from the weight calculator to also see the weight of the stock, offcuts and scrap.

Frequently asked questions

How do you plan profile cuts?

Enter the stock length (6 or 12 m), the saw kerf and the length and quantity of each piece. The calculator places the pieces on bars and returns the number of bars, the cutting pattern of each bar and the waste.

How is the cutting waste percentage calculated?

Waste % = (total stock length − total piece length) / total stock length × 100, including kerf, end trims and remnants.

How many 2300 mm pieces can be cut from a 6 m bar?

Two: 2 × 2300 mm with a 3 mm kerf leaves a 1394 mm offcut. Three pieces need 2 bars; add your other lengths to the list so the offcuts are used.

What saw kerf should I use?

Typically 1.5–3 mm for a band saw and 2–4 mm for a circular cold saw. The exact value depends on blade thickness and set; measure it with a trial cut on your machine.

How much does a 6 m profile weigh?

It depends on the section and material. A 40 × 40 × 2 mm steel box section is about 2.31 kg/m, so 6 m weighs about 13.8 kg. Use the weight calculator for other sizes.

Is the cut list optimizer free?

Yes. It runs in the browser with no installation, account or spreadsheet; paste your list from Excel and share the result as a link.