PRECISION IN MATERIAL. CLARITY IN SUPPLY.

METALS AND ALLOYS

Metal weight calculator.

Approximate weight for round, hexagonal, square and flat bars. Choose a material group for a quick estimate, or a grade to use its typical density. A kg/m weight chart and worked examples follow below.

Material selection

Representative material density8 g/cm³

A general estimate for this material. Selecting a grade can provide a more specific density.

Custom density

Dimensions and quantity

All dimensions are in millimetres. Decimal points and commas are accepted.

How is the weight calculated?

The section area is multiplied by density to find kg/m. Piece weight uses the entered length; total weight also includes quantity.

π × d² / 4 = section area (mm²)
Area × density / 1000 = kg/m
kg/m × length (mm) / 1000 × quantity = total kg
APPROXIMATE WEIGHTRound

Stainless steels

Total weight
10.053kg
Weight per metre
10.053 kg/m
Weight per piece
10.053 kg
Density used
8 g/cm³

A theoretical estimate. Actual dimensions, tolerances and material properties can change the measured weight.

Calculate tolerance for these dimensionsEnquire about these dimensions

Metal weight per metre chart (kg/m)

Weight per metre for round, hexagon, square and flat bar, calculated with the same typical densities as the calculator (g/cm³ in brackets). Weight = cross-section (mm²) × density (g/cm³) ÷ 1000 gives kg per metre; multiply by length in metres. Real bars vary with size tolerance and grade, so use these values for estimates, not for invoicing.

Round bar weight chart304 / 304L · 316L · Aluminium 6082 · Titanium Grade 5 · kg/m · Ø5–Ø200 mm
Diameter (mm)304 / 304L (7.90)316L (8.00)Aluminium 6082 (2.70)Titanium Grade 5 (4.42)
Ø50.1550.1570.0530.087
Ø60.2230.2260.0760.125
Ø80.3970.4020.1360.222
Ø100.6200.6280.2120.347
Ø120.8930.9050.3050.500
Ø151.3961.4140.4770.781
Ø161.5881.6080.5430.889
Ø202.4822.5130.8481.389
Ø253.8783.9271.3252.170
Ø305.5845.6551.9093.124
Ø357.6017.6972.5984.253
Ø409.92710.053.3935.554
Ø4512.5612.724.2947.030
Ø5015.5115.715.3018.679
Ø6022.3422.627.63412.50
Ø7030.4030.7910.3917.01
Ø8039.7140.2113.5722.22
Ø9050.2650.8917.1828.12
Ø10062.0562.8321.2134.71
Ø12089.3590.4830.5449.99
Ø150139.60141.3747.7178.11
Ø200248.19251.3384.82138.86
Hexagon bar weight chart (across flats)304 / 304L · 316L · Aluminium 6082 · kg/m · 8–60 mm
Across flats (mm)304 / 304L (7.90)316L (8.00)Aluminium 6082 (2.70)
80.4380.4430.150
100.6840.6930.234
120.9850.9980.337
141.3411.3580.458
171.9772.0020.676
192.4702.5010.844
223.3113.3531.132
243.9413.9911.347
274.9885.0511.705
306.1576.2352.104
327.0067.0942.394
368.8678.9793.030
4111.5011.653.931
4614.4814.664.948
5017.1017.325.846
6024.6324.948.418
Square bar weight chart304 / 304L · 316L · Aluminium 6082 · kg/m · 8–100 mm
Side (mm)304 / 304L (7.90)316L (8.00)Aluminium 6082 (2.70)
8 × 80.5060.5120.173
10 × 100.7900.8000.270
12 × 121.1381.1520.389
15 × 151.7781.8000.608
20 × 203.1603.2001.080
25 × 254.9385.0001.688
30 × 307.1107.2002.430
40 × 4012.6412.804.320
50 × 5019.7520.006.750
60 × 6028.4428.809.720
80 × 8050.5651.2017.28
100 × 10079.0080.0027.00
Flat bar weight chart304 / 304L · 316L · Aluminium 6082 · kg/m · 20 × 3 – 100 × 20 mm
Width × thickness (mm)304 / 304L (7.90)316L (8.00)Aluminium 6082 (2.70)
20 × 30.4740.4800.162
20 × 50.7900.8000.270
25 × 50.9881.0000.338
30 × 51.1851.2000.405
30 × 102.3702.4000.810
40 × 51.5801.6000.540
40 × 103.1603.2001.080
50 × 51.9752.0000.675
50 × 103.9504.0001.350
60 × 104.7404.8001.620
80 × 106.3206.4002.160
100 × 107.9008.0002.700
100 × 2015.8016.005.400

Worked weight examples

  1. Ø50 mm 316L round bar, 3 m: area π × 50² ÷ 4 = 1963.5 mm²; 1963.5 × 8.00 ÷ 1000 = 15.71 kg/m; × 3 m = 47.12 kg.
  2. 40 × 10 mm 304 flat bar, 6 m: area 400 mm²; 400 × 7.90 ÷ 1000 = 3.16 kg/m; × 6 m = 18.96 kg.
  3. 30 mm across-flats 6082 aluminium hexagon, 10 pieces × 3 m: area √3 ÷ 2 × 30² = 779.4 mm²; 2.104 kg/m; total 63.13 kg.

One tool for different metal weights

A stainless steel bar and an aluminium bar with the same dimensions do not weigh the same. Their volume is identical, but their densities differ. This calculator combines section dimensions, length and material density to estimate weight per metre, per piece and for the full quantity. It covers solid round, hexagonal, square and flat bars from our metal and alloy catalogue.

The material option is useful for a quick general estimate. Grade selection provides a more specific reference when you already know the alloy, such as 316L, 17-4 PH, Alloy 625 or titanium Grade 5. Where a verified grade density is unavailable, the tool clearly identifies the representative family value used instead.

Stainless steel bar weight: 304, 316L and PH grades

Stainless steel weight calculations often start with diameter and length. For a round bar, diameter determines the circular section area; length determines its volume. The density of the selected stainless grade then converts that volume into an approximate mass. Square, hexagonal and flat bars use their own section geometry.

Grades such as 304 and 316L are close in density, so equal-sized bars can have similar weights even though their corrosion performance differs. PH grades, including 17-4 PH, 15-5 PH and 13-8 Mo, have their own typical density references. Grade selection helps avoid applying one general stainless value to every alloy.

Aluminium, titanium and nickel alloy calculations

Aluminium and titanium are lighter than steel at the same volume. This difference is easy to see by keeping the dimensions unchanged and switching materials. For aluminium grades such as 6061, 6082 and 7075, or titanium Grade 2 and Grade 5, grade-specific values make the estimate more relevant than a broad material average.

Nickel and cobalt alloys also vary in density. Alloy 625, Alloy 718, Monel 400 and commercially pure nickel should not automatically share one value. The grade search accepts alloy names, EN numbers and UNS designations, so the reference can follow the material you have in mind. Weight alone does not describe strength, corrosion resistance or suitability for an application.

What the dimensions mean

All dimensions are entered in millimetres. Round bar uses diameter; square bar uses one side; flat bar uses width and thickness. A hexagonal bar uses the distance between opposite parallel faces, commonly called the across-flats size. The length field refers to one piece, while quantity gives the number of identical pieces.

For example, a square section of 10 × 10 mm and a flat section of 20 × 5 mm have the same area. With the same length and density, they therefore have the same calculated weight. Doubling a round bar’s diameter multiplies its area, and its weight at the same length, by four.

A theoretical weight, with a clear density reference

Density is shown in g/cm³. Grade references are typical manufacturer-published values rather than measurements of a particular batch. The reference condition and temperature appear when available, because values can differ with the published material condition. An optional custom density can also be used.

The result remains an estimate: actual dimensions, manufacturing tolerances and the material supplied can change the scale weight. This tool calculates solid sections only. Hollow tubes, threaded parts, flanges and fittings need different geometry and are not represented by a solid bar calculation.

Frequently asked questions

What is the difference between material and grade selection?

Material selection uses a representative group or family density. Grade selection uses the verified typical density for that grade when available. If it is unavailable, the representative value is clearly labelled.

What is the difference between total kg and kg/m?

The weight of one metre of the section is expressed in kg/m. Piece weight includes the entered length; total weight also includes quantity. For a 2-metre piece, piece weight is twice kg/m.

How much does a 316L round bar weigh?

It depends on diameter and length. As an example, a 20 mm diameter bar, 1000 mm long, with a density of 8 g/cm³ weighs approximately 2.513 kg. Changing the length or quantity changes the result proportionally.

Can I calculate aluminium and titanium bar weights?

Yes. The material choices include aluminium and titanium, and grade search includes our listed grades. All four solid section shapes can be calculated with the selected density.

How are flat bars and rectangular plates calculated?

A solid rectangular section uses width × thickness × length × density. The Flat option can represent this simple geometry, including a plain rectangular plate within the supported dimensions. Holes, cut-outs and shaped edges are not deducted.

Can I calculate pipe or tube weight here?

No. A tube requires wall thickness and the internal void to be included. The Round option represents a solid round bar and must not be used as a tube calculation.

Which dimension is used for a hexagonal bar?

Across flats: the distance between two opposite parallel faces. The calculator does not use the distance between opposite corners.

Are the results exact delivery weights?

No. They are theoretical estimates based on dimensions and density. Actual material tolerances and dimensions can change the measured weight.

Does the calculation support decimal dimensions?

Yes. Decimal points and commas are accepted, for example 12.5 or 12,5 mm. Quantity must be a positive whole number.

What is the formula for metal weight?

Weight per metre (kg/m) = cross-section (mm²) × density (g/cm³) ÷ 1000. The section is π × d² ÷ 4 for round, √3 ÷ 2 × across-flats² for hexagon, side² for square and width × thickness for flat bar. For Ø50 mm 316L: 1963.5 × 8.00 ÷ 1000 = 15.71 kg/m.

How much does a 40 × 10 flat bar weigh?

A 40 × 10 mm 304 stainless flat bar weighs about 3.16 kg/m, so a 6 m length is 18.96 kg. A 50 × 10 mm flat bar is 3.95 kg/m. Other sizes are in the flat bar weight chart on this page.

How is aluminium weight calculated?

The formula is the same; only the density changes. With 2.70 g/cm³ for 6082 aluminium, a Ø50 mm aluminium bar weighs 5.30 kg/m. The same 304 stainless bar is 15.51 kg/m, so aluminium weighs roughly a third as much.