PRECISION IN MATERIAL. CLARITY IN SUPPLY.

HARDNESS CONVERSION

HRB to HV conversion chart

Convert HRB to an approximate HV value, or the other way round. Choose the material group; HRB – HV tables for steel and stainless follow below.

MEASURED HARDNESS

Scale and value

Hardness scale

Table range: 61–100 HRB. A decimal comma or point is accepted.

Approximate comparison for stainless steels. Not a grade-specific measurement.

Table scope

Uses a general stainless steel comparison dataset. Grade and material condition can affect the relationship within this group. It does not apply to another metal family.

HARDNESS COMPARISONS

Approximate conversion

HRCRockwell C

—

No table comparison
HRBRockwell B

90

Your input
HBBrinell

≈192

Approximate comparison
HVVickers

≈203

Approximate comparison

Estimated tensile strength

UTS · N/mm² (MPa)

≈ 652 N/mm²

A material-dependent estimate; not a replacement for a tensile test or certificate result.

HRC: — HRB: 90 HB: ≈ 192 HV: ≈ 203 Estimated tensile strength (UTS): ≈ 652 N/mm²

Hardness conversion tableHRC · HRB · HB · HV · Estimated UTS

The selected row, or two adjacent rows used in calculation, are highlighted. A dash indicates an unavailable comparison.

Approximate comparison for stainless steels. Not a grade-specific measurement.
HRCRockwell CHRBRockwell BHBBrinellHVVickersUTSEstimated · N/mm²
57——640—
56——615—
54.5——591—
53.5——569—
52——547—
51——528—
49.5——508—
48.5——4911539
47—4444741520
45.5—4294551471
44.5—4154401422
43—4014251363
42—3884101314
40.5—3753961265
39—3633831236
38—3523721187
36.5—3413601157
35.5—3313501118
34.5—3213391089
33—3113281049
32—3023191020
31—293309990
30—285301971
29—277292941
27.5—269284912
26.5—262276892
25.5100255269873
2499248261853
2398241253824
2297235247794
20.596229241775
——223235755
—95217228745
—94212223716
—93207218696
—91197208667
—89187197637
—87179189608
—85170179559
—83163172539
—81156165530
—79149157500
—77143150481
—74137144471
—72131138461
—69126133451
—67121127431
—64116122422
—61111117402
——107113382
——103108373
Sources and technical details

Numerical table source: BSSA — stainless steel hardness comparison. The source defines the scope of the approximate comparison; it is not a test result for a particular component.

HRB to HV conversion chart

Rows are the measured comparison points the calculator uses, read in both directions: find HRB in the first column for HV, or HV in the second column for HRB. Values between rows are interpolated by the calculator above.

HRB – HV: carbon and low-alloy steelapproximate; reference points of the calculator
HRBHV
99.5250
98.1240
96.7230
96225
95220
94215
93.5210
92.5205
91.5200
89.5190
87.1180
85170
81.7160
78.7150
75140
71.2130
66.7120
62.3110
56.2100
5295
4890
4185
HRB – HV: stainless steelapproximate; reference points of the calculator
HRBHV
100269
99261
98253
97247
96241
95228
94223
93218
91208
89197
87189
85179
83172
81165
79157
77150
74144
72138
69133
67127
64122
61117

Worked examples

  1. 70 HRB → ≈ 135 HV in stainless.
  2. 85 HRB → ≈ 170 HV in carbon steel, ≈ 179 HV in stainless.
  3. 95 HRB → ≈ 220 HV in carbon steel, ≈ 228 HV in stainless.

What are HRB and HV?

HRB (Rockwell B) is read from the indentation depth of a 1/16 in (1.588 mm) ball under a 100 kgf total load; it is used for softer materials such as mild steel, brass and aluminium.

HV (Vickers) is calculated from the diagonals of the impression of a 136° diamond pyramid; one scale covers very soft to very hard materials.

How do you convert HRB to HV?

There is no exact formula between HRB and HV; the two tests use different indenters and loads. Conversion uses comparison tables measured on both scales for the same material group. A value on a table row is read directly; one between two rows is interpolated between those rows only.

The result is approximate and depends on the material group. For acceptance or certificates, measure the required scale directly.

Valid range of the chart

The carbon and low-alloy steel chart covers 41–99.5 HRB and 85–250 HV; the stainless steel chart covers 61–100 HRB and 117–269 HV. No conversion is given outside these ranges.

Frequently asked questions

What is 90 HRB in HV?

About 203 HV for stainless steel. The value is approximate and depends on the material group.

What is 203 HV in HRB?

About 92.1 HRB for carbon and low-alloy steel and about 90.1 HRB for stainless steel. The reverse conversion reads the same comparison table.

Is there a formula from HRB to HV?

There is no universal formula. Conversion relies on comparison tables measured on both scales for the same material group, and the tables differ by material.

Is the HRB to HV conversion the same for stainless?

Not exactly; each material group has its own chart. For 90 HRB: about 203 HV for stainless steel. Choose the material group in the calculator.

What is the difference between HRB and HV?

HRB (Rockwell B) is read from the indentation depth of a 1/16 in (1.588 mm) ball under a 100 kgf total load; it is used for softer materials such as mild steel, brass and aluminium. HV (Vickers) is calculated from the diagonals of the impression of a 136° diamond pyramid; one scale covers very soft to very hard materials.