HARDNESS CONVERSION
HRB to HB conversion chart
Convert HRB to an approximate HB value, or the other way round. Choose the material group; HRB – HB tables for steel and stainless follow below.
MEASURED HARDNESS
Scale and value
Table range: 61–100 HRB. A decimal comma or point is accepted.
Approximate comparison for stainless steels. Not a grade-specific measurement.
Table scope
Uses a general stainless steel comparison dataset. Grade and material condition can affect the relationship within this group. It does not apply to another metal family.
HARDNESS COMPARISONS
Approximate conversion
—
No table comparison90
Your input≈192
Approximate comparison≈203
Approximate comparisonEstimated tensile strength
UTS · N/mm² (MPa)
≈ 652 N/mm²
A material-dependent estimate; not a replacement for a tensile test or certificate result.
HRC: — HRB: 90 HB: ≈ 192 HV: ≈ 203 Estimated tensile strength (UTS): ≈ 652 N/mm²
Hardness conversion tableHRC · HRB · HB · HV · Estimated UTS
The selected row, or two adjacent rows used in calculation, are highlighted. A dash indicates an unavailable comparison.
| HRCRockwell C | HRBRockwell B | HBBrinell | HVVickers | UTSEstimated · N/mm² |
|---|---|---|---|---|
| 57 | — | — | 640 | — |
| 56 | — | — | 615 | — |
| 54.5 | — | — | 591 | — |
| 53.5 | — | — | 569 | — |
| 52 | — | — | 547 | — |
| 51 | — | — | 528 | — |
| 49.5 | — | — | 508 | — |
| 48.5 | — | — | 491 | 1539 |
| 47 | — | 444 | 474 | 1520 |
| 45.5 | — | 429 | 455 | 1471 |
| 44.5 | — | 415 | 440 | 1422 |
| 43 | — | 401 | 425 | 1363 |
| 42 | — | 388 | 410 | 1314 |
| 40.5 | — | 375 | 396 | 1265 |
| 39 | — | 363 | 383 | 1236 |
| 38 | — | 352 | 372 | 1187 |
| 36.5 | — | 341 | 360 | 1157 |
| 35.5 | — | 331 | 350 | 1118 |
| 34.5 | — | 321 | 339 | 1089 |
| 33 | — | 311 | 328 | 1049 |
| 32 | — | 302 | 319 | 1020 |
| 31 | — | 293 | 309 | 990 |
| 30 | — | 285 | 301 | 971 |
| 29 | — | 277 | 292 | 941 |
| 27.5 | — | 269 | 284 | 912 |
| 26.5 | — | 262 | 276 | 892 |
| 25.5 | 100 | 255 | 269 | 873 |
| 24 | 99 | 248 | 261 | 853 |
| 23 | 98 | 241 | 253 | 824 |
| 22 | 97 | 235 | 247 | 794 |
| 20.5 | 96 | 229 | 241 | 775 |
| — | — | 223 | 235 | 755 |
| — | 95 | 217 | 228 | 745 |
| — | 94 | 212 | 223 | 716 |
| — | 93 | 207 | 218 | 696 |
| — | 91 | 197 | 208 | 667 |
| — | 89 | 187 | 197 | 637 |
| — | 87 | 179 | 189 | 608 |
| — | 85 | 170 | 179 | 559 |
| — | 83 | 163 | 172 | 539 |
| — | 81 | 156 | 165 | 530 |
| — | 79 | 149 | 157 | 500 |
| — | 77 | 143 | 150 | 481 |
| — | 74 | 137 | 144 | 471 |
| — | 72 | 131 | 138 | 461 |
| — | 69 | 126 | 133 | 451 |
| — | 67 | 121 | 127 | 431 |
| — | 64 | 116 | 122 | 422 |
| — | 61 | 111 | 117 | 402 |
| — | — | 107 | 113 | 382 |
| — | — | 103 | 108 | 373 |
Sources and technical details
Numerical table source: BSSA — stainless steel hardness comparison. The source defines the scope of the approximate comparison; it is not a test result for a particular component.
HRB to HB conversion chart
Rows are the measured comparison points the calculator uses, read in both directions: find HRB in the first column for HB, or HB in the second column for HRB. Values between rows are interpolated by the calculator above.
HRB – HB: carbon and low-alloy steelapproximate; reference points of the calculator
| HRB | HB |
|---|---|
| 99.5 | 238 |
| 98.1 | 228 |
| 96.7 | 219 |
| 96 | 214 |
| 95 | 209 |
| 94 | 204 |
| 93.5 | 199 |
| 92.5 | 195 |
| 91.5 | 190 |
| 89.5 | 181 |
| 87.1 | 171 |
| 85 | 162 |
| 81.7 | 152 |
| 78.7 | 143 |
| 75 | 133 |
| 71.2 | 124 |
| 66.7 | 114 |
| 62.3 | 105 |
| 56.2 | 95 |
| 52 | 90 |
| 48 | 86 |
| 41 | 81 |
HRB – HB: stainless steelapproximate; reference points of the calculator
| HRB | HB |
|---|---|
| 100 | 255 |
| 99 | 248 |
| 98 | 241 |
| 97 | 235 |
| 96 | 229 |
| 95 | 217 |
| 94 | 212 |
| 93 | 207 |
| 91 | 197 |
| 89 | 187 |
| 87 | 179 |
| 85 | 170 |
| 83 | 163 |
| 81 | 156 |
| 79 | 149 |
| 77 | 143 |
| 74 | 137 |
| 72 | 131 |
| 69 | 126 |
| 67 | 121 |
| 64 | 116 |
| 61 | 111 |
Worked examples
- 70 HRB → ≈ 128 HB in stainless.
- 85 HRB → ≈ 162 HB in carbon steel, ≈ 170 HB in stainless.
- 95 HRB → ≈ 209 HB in carbon steel, ≈ 217 HB in stainless.
What are HRB and HB?
HRB (Rockwell B) is read from the indentation depth of a 1/16 in (1.588 mm) ball under a 100 kgf total load; it is used for softer materials such as mild steel, brass and aluminium.
HB (Brinell) is calculated from the diameter of the impression of a hard metal ball (for steels usually 10 mm and 3000 kgf); its large impression gives an average value on castings and coarse structures. With a hard metal ball the result is also written HBW.
How do you convert HRB to HB?
There is no exact formula between HRB and HB; the two tests use different indenters and loads. Conversion uses comparison tables measured on both scales for the same material group. A value on a table row is read directly; one between two rows is interpolated between those rows only.
The result is approximate and depends on the material group. For acceptance or certificates, measure the required scale directly.
Valid range of the chart
The carbon and low-alloy steel chart covers 41–99.5 HRB and 81–238 HB; the stainless steel chart covers 61–100 HRB and 111–255 HB. No conversion is given outside these ranges.
Frequently asked questions
What is 90 HRB in HB?
About 192 HB for stainless steel. The value is approximate and depends on the material group.
What is 192 HB in HRB?
About 91.9 HRB for carbon and low-alloy steel and about 90 HRB for stainless steel. The reverse conversion reads the same comparison table.
Is there a formula from HRB to HB?
There is no universal formula. Conversion relies on comparison tables measured on both scales for the same material group, and the tables differ by material.
Is the HRB to HB conversion the same for stainless?
Not exactly; each material group has its own chart. For 90 HRB: about 192 HB for stainless steel. Choose the material group in the calculator.
What is the difference between HRB and HB?
HRB (Rockwell B) is read from the indentation depth of a 1/16 in (1.588 mm) ball under a 100 kgf total load; it is used for softer materials such as mild steel, brass and aluminium. HB (Brinell) is calculated from the diameter of the impression of a hard metal ball (for steels usually 10 mm and 3000 kgf); its large impression gives an average value on castings and coarse structures. With a hard metal ball the result is also written HBW.